henselmonster Posted June 18, 2017 Author Posted June 18, 2017 Finally got an accurate size for the canteen. Just did a print. Needs to be slightly wider, I'll update the file on thingisverse later today. I'm also posting a sales thread soon for anyone who may want a kit printed for them. Quote
CrookKnight Posted June 24, 2017 Posted June 24, 2017 On 6/18/2017 at 5:47 PM, henselmonster said: Finally got an accurate size for the canteen. Just did a print. Needs to be slightly wider, I'll update the file on thingisverse later today. I'm also posting a sales thread soon for anyone who may want a kit printed for them. Looks Really Good Quote
CrookKnight Posted June 24, 2017 Posted June 24, 2017 Here is a different version of the exhaust system: https://drive.google.com/open?id=0B-5MSAWBsr_vQWN6bExKU2RLZlU 1 Quote
henselmonster Posted January 5, 2018 Author Posted January 5, 2018 Added parts from Stromtrooperguy! Quote
henselmonster Posted January 6, 2018 Author Posted January 6, 2018 Here is a new project I am working on for this. So far I am just drawing out the schematics to the exact scale of the real radio. Still need a lot of work and refinement, especially in the details. Not quite there yet, but this is just a WIP. After this, I will model it and get it up on Thingiverse for anyone to 3D print an accurate sized radio replica. Quote
Bobby Boucher Posted May 13, 2019 Posted May 13, 2019 Hey @henselmonster, did anyone ever model the white thermal detonator piece that sits on the radar tube? I don't know the exact terminology Quote
henselmonster Posted May 13, 2019 Author Posted May 13, 2019 12 hours ago, Bobby Boucher said: Hey @henselmonster, did anyone ever model the white thermal detonator piece that sits on the radar tube? I don't know the exact terminology I am not sure if anyone has modeled that. It might be a fun one to take a stab at. I'll be on the lookout Quote
Bobby Boucher Posted May 23, 2019 Posted May 23, 2019 On 5/13/2019 at 7:01 AM, henselmonster said: I am not sure if anyone has modeled that. It might be a fun one to take a stab at. I'll be on the lookout I can give it a shot. I've always talked about getting into modeling and designing parts, just never done it. Might be a good learning experience Quote
CrookKnight Posted May 23, 2019 Posted May 23, 2019 I modeled it and can post it here.Sent from my iPhone using Tapatalk Quote
CrookKnight Posted May 23, 2019 Posted May 23, 2019 See attached STL file. Feel free to revise this if needed. TD-New Control Panel.stl Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Here is my Siphon: https://drive.google.com/open?id=19ZGgDlyweUGmvVLNL6aYoqq0R7_XEeUL Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Here is the Mushroom Cap and Bottle. They screw together. https://drive.google.com/open?id=1jLZVNF9FaEoARTmoZwSYl6NAcNEYmV1L Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Here is the Tupperware Top Dish Thing: https://drive.google.com/open?id=1mPspEa-v7LCWW8h322N26QvVmrJB0mPs Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Type 1 Pack Filter: https://drive.google.com/open?id=1lN4356-Qt-c_XglBDd9K-vNR3e-1LztM Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Type 5 Pack Filter https://drive.google.com/open?id=1TrOSXRPKj6M9oyNV4Uq8zy_3NSzj3KHA Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Here are all of the files for the Jedha Pack. Not shown are the Thermal Detonators on the left side. https://drive.google.com/open?id=17YbfIBpl-Vbl73pcSJwZOCgQkMACL9aJ It is a ton of files, by the way. 2 Quote
RoCKo Posted February 17, 2020 Posted February 17, 2020 Could you please include a picture of these new parts?! Quote
CrookKnight Posted February 17, 2020 Posted February 17, 2020 Could you please include a picture of these new parts?! I will trySent from my iPhone using Tapatalk Quote
DKK Hollywood Posted July 19, 2021 Posted July 19, 2021 Hello all, give me a few days and I will share my digitally scanned model of the Sonix/Northstar, it’s as accurate as one could ever hope for without having an original radio. I’ve broken it down into easier to print pieces. I also made the main box with hex head anchor points and a hollow back to save weight. Cheers, Hollywood 3 Quote
Hausi Posted July 19, 2021 Posted July 19, 2021 Now that 3D print looks pristine, great work! Did you print that in resin? Quote
welshchris77 Posted July 19, 2021 Posted July 19, 2021 Fantastic work Sent from my SM-A310F using Tapatalk Quote
DKK Hollywood Posted July 20, 2021 Posted July 20, 2021 3D printed in PLA at .12mm layer height, then a coat of acrylic primer filler to add a layer of smoothness. A gentle wet rub with 600 grit wet and dry. a coat of flat black and some dry brush weathering (Valejo Dark Flesh) to get in all the nooks and crannies like sand would. 1 Quote
DKK Hollywood Posted July 20, 2021 Posted July 20, 2021 Just waiting on some accurate 3.5mm sockets to arrive. Holes already built into the 3D print of the main box...just need to pierce the leather wrap and screw in. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.