henselmonster Posted March 16, 2017 Share Posted March 16, 2017 If you have been following my previous posts you'll see I have been working on 3D printable files for a lot of the backpack parts. I want these to be available to everyone, and allow people to update the files as they need. They are all a work in progress. The more I learn, the more accurate I can make them. My ultimate goal is to be able to provide free 3d printable files for all field pack styles. It will be a long process but i think this is a good start. I will be sure to make note of when things are updated. If you made any modifications, or make your own parts, please post them here and I will add them to the list! Here are a few links to the ones created so far! Stormtrooperguy's Sonix Radio - https://www.thingiverse.com/thing:1862286 Henselmonster's Shires style siphon - http://www.thingiverse.com/thing:2172916 Stormtrooperguy's Siphon - https://www.thingiverse.com/thing:1949934 Henselmonster's Exhaust - http://www.thingiverse.com/thing:2172649 Crookknight's Exhaust - https://drive.google.com/open?id=0B-5MSAWBsr_vQWN6bExKU2RLZlU Henselmonster's Canteen - http://www.thingiverse.com/thing:2172323 Crookknight's Canteen - https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8 Stormtrooperguy's Canteen - https://www.thingiverse.com/thing:1949924 Henselmonster's Mushroom Caps - http://www.thingiverse.com/thing:2282341 Stormtrooperguy's Mushroom Caps and Bottles - https://www.thingiverse.com/thing:1949940 Stormtrooperguy's Radar Dish Mount - https://www.thingiverse.com/thing:1952134 Stormtrooperguy's Mortar Tube End Caps - https://www.thingiverse.com/thing:1949943 3 5 Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted March 16, 2017 Share Posted March 16, 2017 If you have been following my previous posts you'll see I have been working on 3D printable files for a lot of the backpack parts. I want these to be available to everyone, and allow people to update the files as they need. They are all a work in progress. The more I learn, the more accurate I can make them. My ultimate goal is to be able to provide free 3d printable files for all field pack styles. It will be a long process but i think this is a good start. I will be sure to make note of when things are updated. If you made any modifications, or make your own parts, please post them here and I will add them to the list! Here are a few links to the ones I have created. Shires style siphon - http://www.thingiverse.com/thing:2172916 Exhaust - http://www.thingiverse.com/thing:2172649 Canteen - http://www.thingiverse.com/thing:2172323These are greatSent from my SM-G930P using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 16, 2017 Share Posted March 16, 2017 Giving back to the community! I LIKE it... see what I did there? In all seriousness though, thank you John! 2 Quote Link to comment Share on other sites More sharing options...
iconoclasta_88 Posted March 16, 2017 Share Posted March 16, 2017 THX for sharing... This is what this community is about! Saludos. 2 Quote Link to comment Share on other sites More sharing options...
trooper1 Posted March 17, 2017 Share Posted March 17, 2017 Very nice. Wonder what is next. Lol keep up the great work 2 Quote Link to comment Share on other sites More sharing options...
RoCKo Posted March 17, 2017 Share Posted March 17, 2017 Community thinking, much appreciated! Thanks! 2 Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 18, 2017 Share Posted April 18, 2017 I printed the Canteen (3D file by Henslemonster) last night. I used one of my Hatchbox Alpha machines set to high quality PLA. Turned out pretty good. Going to paint it and post it on here to get everyone's thoughts. I love the idea that I will not have to go through the painstaking process of making the canteens again. As soon as my filament arrives, I will print the other 2 parts on post pictures on here of the final products. Henslemonster did a good job on the files, can't wait to see the others. 1 Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted April 18, 2017 Share Posted April 18, 2017 Hopefully you will offer these for sale here My 3 year old is hooked on those dang Grocery Gang and bling bags too! 1 Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 18, 2017 Author Share Posted April 18, 2017 3 minutes ago, Airborne Trooper said: Hopefully you will offer these for sale here My 3 year old is hooked on those dang Grocery Gang and bling bags too! Don't worry! Working on a sales thread for all my backpack parts, as well as the electrobinoculars! Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 18, 2017 Share Posted April 18, 2017 Hopefully you will offer these for sale here My 3 year old is hooked on those dang Grocery Gang and bling bags too!My 7 year old also is hooked on the Grocery Gang.Sent from my SM-G930P using Tapatalk Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 19, 2017 Share Posted April 19, 2017 This is an updated 3D rendering. Going to try a test print tomorrow night once new filament arrives. Made it more rounded. 1 Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 19, 2017 Author Share Posted April 19, 2017 1 hour ago, CrookKnight said: This is an updated 3D rendering. Going to try a test print tomorrow night once new filament arrives. Made it more rounded. Nice looks great! Feel free to add a link here if you would like to share it and i can add it to the list 1 Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 26, 2017 Share Posted April 26, 2017 I will upload the design files shortly. Just need to set it up so they can be shared. Here are some pictures of the finished product. 2 Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 26, 2017 Author Share Posted April 26, 2017 Nice!! Looks great! Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted April 26, 2017 Share Posted April 26, 2017 That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 26, 2017 Share Posted April 26, 2017 That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. Sure. No problem.Sent from my SM-G930P using Tapatalk Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 29, 2017 Author Share Posted April 29, 2017 Model updated! I just uploaded a more accurate canteen. Still not perfect, but much much better. Canteen - http://www.thingiverse.com/thing:2172323 I will do a test print this weekend! 1 Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 29, 2017 Author Share Posted April 29, 2017 I also just added a model for the mushroom caps! The sizing isn't correct but you can size it to whatever bottles you are using. http://www.thingiverse.com/thing:2282341 Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 29, 2017 Share Posted April 29, 2017 Below is a link to a version I have been working on and I use on the packs I sell. I like the way John's is coming along also. Looks a little more rounded. I cannot upload files to Thingiverse, so I have them in Googledrive. I have 3 large printers and can print these for people if they want them. Here is the link. https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8 Here is a 3D rendering. This is a picture of it on a pack that was just sent to Michael in Australia. This picture shows the version with the cap. The cap has since been removed and a whole the correct size for the bee stinger has been added. 1 Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted April 29, 2017 Share Posted April 29, 2017 On 4/26/2017 at 11:47 AM, Airborne Trooper said: That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. Done. I will post a picture of the reprinted portion when I build my next pack. I have 3 pack orders in the pipeline. I did post the 3D model, though. 1 Quote Link to comment Share on other sites More sharing options...
henselmonster Posted April 29, 2017 Author Share Posted April 29, 2017 1 hour ago, CrookKnight said: Below is a link to a version I have been working on and I use on the packs I sell. I like the way John's is coming along also. Looks a little more rounded. I cannot upload files to Thingiverse, so I have them in Googledrive. I have 3 large printers and can print these for people if they want them. Here is the link. https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8 Here is a 3D rendering. This is a picture of it on a pack that was just sent to Michael in Australia. This picture shows the version with the cap. The cap has since been removed and a whole the correct size for the bee stinger has been added. Awesome dude! Thanks for sharing, I'll add it to the list! Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted May 19, 2017 Share Posted May 19, 2017 Has anyone tried printing the Shire's Style Siphon yet? I was thinking about giving it a shot and was wondering if it came out ok. Quote Link to comment Share on other sites More sharing options...
johaneggink Posted May 24, 2017 Share Posted May 24, 2017 This is great. Is there a picture of all the sizes of the parts that still need to be made? Like how big are the bottles and the boxes? Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted May 25, 2017 Share Posted May 25, 2017 On 5/19/2017 at 2:40 PM, CrookKnight said: Has anyone tried printing the Shire's Style Siphon yet? I was thinking about giving it a shot and was wondering if it came out ok. If you make one, let me know! I am looking for one and if I can get one stateside, that'd be great. Quote Link to comment Share on other sites More sharing options...
CrookKnight Posted May 25, 2017 Share Posted May 25, 2017 If you make one, let me know! I am looking for one and if I can get one stateside, that'd be great. I will print one soon.Sent from my SM-G930P using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.