Ardkorian Posted February 24, 2013 Share Posted February 24, 2013 Name: Glenn Coulthard Legion ID #: TD-8640 Link to 501st Profile http://www.501st.com...hp?userID=13682 Forum Name: ARDKORIAN Garrison: UK -One helmet off photo. -One full armor, helmet on, front photo. -One full armor, helmet on, right side photo. -One full armor, helmet on, left side photo. -One full armor, helmet on, back photo. -Canvas or elastic shoulder straps detail photo. -Canvas belt detail photo & Abs details close up photo. Other Detail Pics Neck Seal Pauldron Butt & Cod Snaps/Rivets Kidney Plate Rivets/Brads -Ab Rivets/Brads Ab Back of Male Snap Chest & Back Plates Gloves Boots Shoulder Pouch Bucket (pictures can show details individually or in groups): -A close up photo clearly showing the flat green lenses. -Detail photo showing no stripes on all grey traps and tears. -Detail photo of frown, showing 4 teeth cut out and grey paint. -Detail photo of hovi-mix mic tips (or replica) mounted on helmet. -Detail photos of blue tube stripes. Backpack: Weapons: -At least one picture showing the whole weapon (BFG or E11). -Detail pictures of mods required for the specific weapons. Finally, -One (or several) full body action (or attitude poses) good quality picture. Hopefully I have supplied all the required photos. Here keeping my fingers crossed. Glenn Quote Link to comment Share on other sites More sharing options...
SCRIBBLER Posted February 24, 2013 Share Posted February 24, 2013 Thanks for submitting your application. Review process has begun. Standby... Quote Link to comment Share on other sites More sharing options...
Beren Posted February 24, 2013 Share Posted February 24, 2013 Great looking build Glenn! Should be an "easy pass". See you in the cantina soon... Quote Link to comment Share on other sites More sharing options...
DarthChridan Posted February 24, 2013 Share Posted February 24, 2013 Hey Glenn... looking good so far, mate. The armour is a TM, right!?! I love it too A question about your weathering/ trooper style, then I think you go for SWAT in the near future. The flame weathering on the helmet is to far off the middle, because it's rather in the middle positioned. Look at here---> http://www.flickr.co...N03/8504040149/ Then the tubestripes....Davin's helmet has 15 stripes each side. Then the next question about your gear. You wear the captain's pack...respectively the desert pack of Davin Felth and your primary weapon is the DLT-19....it reveals itself, that you present no specific version?!?! http://forum.mepd.ne...?showtopic=7255 ...either the E-11 Blaster for the desert version or the filter pack n°5 for the cantina version. But ok, it's not too tragic...it's first the 'Police Officer' request....but like I wrote....I think you go in the near future for SWAT At next your weapon especially....at the left side it still lacks the ammo box and at the right side the other details of the MG34. The next missed detail is the wire at the t-tracks and the missed painting--->> http://www.looksirdr...s_DLT-19_01.jpg http://www.philaord..../MG34B-mast.jpg Ok, that' it of my side so far.....good luck with your application, trooper But the last word has as always our Mike Quote Link to comment Share on other sites More sharing options...
inglorious trooper Posted February 24, 2013 Share Posted February 24, 2013 really nice setup glenn,spot on! are you going to be adding the extra greeblies to your dlt19? Quote Link to comment Share on other sites More sharing options...
THE TROOPER Posted February 24, 2013 Share Posted February 24, 2013 Wow, for a minute there i thought i was looking at the swat thread. Really nice mate. The helmet, weapon wire, were already mentioned. But really nice man Should be seeing you in the cantina soon bro.....all the best....... Quote Link to comment Share on other sites More sharing options...
SCRIBBLER Posted February 24, 2013 Share Posted February 24, 2013 @ Glenn - Welcome inside the 'Precinct', Brother! Another 'Boot' that came VERY prepared! Excellent looking armor and gear. Looks like this will be cut and dry. Let's begin... APPLICATION REVIEW (PART 1) Name: Glenn Coulthard Legion ID #: TD-8640 Forum Name: ARDKORIAN Garrison: UK I.) HELMET: a.) Green Lenses -- CHECK b.) Paint Color on Traps / Tears -- CHECK c.) Correct Number Of Teeth -- CHECK d.) Mic Tips -- CHECK e.) Vocoder Color (Black) -- CHECK f.) Tube Stripes -- CHECK g.) Rank Bar -- CHECK h.) Brow -- CHECK i.) Side Screws (Ears): CHECK ** Additional Comments -- A.) DEPLOYMENT OFFICER: Looking from the get go, Brother. Nice work! ** CHECKED and CLEARED ** II.) Armor / Suit Details: a.) Canvas Straps -- (SEE COMMENTS) b.) Neck Seal -- CHECK c.) Black Undersuit -- CHECK d.) Shoulder Bells -- CHECK e.) Biceps -- CHECK f.) Forearms -- CHECK g.) Pauldron -- CHECK h.) Chest / Back Plate -- CHECK I.) Kidney / Butt Plate -- CHECK j.) Ab Plate / Side Rivets / Cod -- CHECK k.) Thighs -- CHECK l.) Shins / Calves -- CHECK m.) Sniper Plate -- CHECK n.) Boots -- CHECK o.) Gloves -- CHECK p.) Hand Plates / Guards --CHECK q.) Ammo Belt (Waist) w/ correct Angled Edges -- CHECK r.) Ammo Belt (Right Knee) -- CHECK s.) Canvas Belt -- CHECK t.) Pouches -- CHECK u.) Weathering -- CHECK v.) Crotch Snaps -- CHECK ** Additional Comments -- A.) DEPLOYMENT OFFICER: Can you send in another pic of your canvas shoulder straps. Not sure if it's the lighting, but are they weathered? If they aren't , please beat those up, Trooper! III.) BACKPACK: a.) Details -- CHECK b..) Weathering -- CHECK A.) DEPLOYMENT OFFICER: Great pack build, Brother! Excellent leather wrap of the radio too! The tube could be shortened in length a bit, though. This won't affect Officer deployment, but will be noted if you decide to go S.W.A.T. Should look more like this (below) in terms of overall length... ** CHECKED and CLEARED ** IV.) WEAPON(S): DLT-19 a.) Details -- (SEE COMMENTS) b..) Weathering -- CHECK ** Additional Comments -- A.) DEPLOYMENT OFFICER: Need to see the ammo box added to the DLT-19, My Friend. Please take care of that mod and submit an updated pic. You should be fine after that. Thanks! Quote Link to comment Share on other sites More sharing options...
rhapsodyred99 Posted February 24, 2013 Share Posted February 24, 2013 Lookin good, besides those comments noted I have nothing to add. Just wanted to stop by and say good work! Quote Link to comment Share on other sites More sharing options...
Ardkorian Posted February 24, 2013 Author Share Posted February 24, 2013 The canvas straps were 'Tea-bagged' I will harshen them up, or will submit my elastic straps which are more weathered. I will have to get some materials for the DLT Ammo box and upgrades....gutted that it is the weapon thats now holding the submission up Quote Link to comment Share on other sites More sharing options...
SCRIBBLER Posted February 24, 2013 Share Posted February 24, 2013 @ Glenn - No worries, just take care of that DLT detail so the announcement can be made, Brother. GREAT work, bottom line! Quote Link to comment Share on other sites More sharing options...
Gordonator Posted February 24, 2013 Share Posted February 24, 2013 Looking good Glenn! I agree with Mike, if you are shorten the top of the mortar tube that will look a lot better. Just some sawing work I suppose. Good Luck! Quote Link to comment Share on other sites More sharing options...
THE TROOPER Posted February 25, 2013 Share Posted February 25, 2013 The canvas straps were 'Tea-bagged' I will harshen them up, or will submit my elastic straps which are more weathered. I will have to get some materials for the DLT Ammo box and upgrades....gutted that it is the weapon thats now holding the submission up he said "tea bagged" lol Quote Link to comment Share on other sites More sharing options...
Purplehaze Posted February 25, 2013 Share Posted February 25, 2013 Glenn, I love that neck seal, is it vynil or leather & did you make it or purchace it. Andrew. Almost forgot, your armour looks magnificent, nice to see another white pauldron. Quote Link to comment Share on other sites More sharing options...
Ardkorian Posted February 25, 2013 Author Share Posted February 25, 2013 Neckseal is faux leather and came from rebelscum workshop. Just send him your neck measurements and he custom makes them. Quote Link to comment Share on other sites More sharing options...
Ardkorian Posted February 25, 2013 Author Share Posted February 25, 2013 For the ammo port/box, should it be a solid box or should it be more like the original? I'm not sure what was used in the films as I can't get a clear enough screen grab. Quote Link to comment Share on other sites More sharing options...
trooper1 Posted February 26, 2013 Share Posted February 26, 2013 Solid box, I am pretty sure. Also nice build my friend. Very well done Quote Link to comment Share on other sites More sharing options...
SCRIBBLER Posted February 26, 2013 Share Posted February 26, 2013 Trooper1 is correct. A solid box will do just fine. Quote Link to comment Share on other sites More sharing options...
inglorious trooper Posted February 26, 2013 Share Posted February 26, 2013 ruggeros thread in the dlt19 section is worth checking out glenn, really helpful as it has the measurements! Quote Link to comment Share on other sites More sharing options...
Ardkorian Posted February 26, 2013 Author Share Posted February 26, 2013 As usual my brains gone into 'If its worth doing, its worth doing properly' mode and I'm maybe thinking about going into to much detail on this. gonna practive with some carboard to see what I can come up with. Got ssome lovely close up photos as reference. Will let you know how I get on. Quote Link to comment Share on other sites More sharing options...
nick.black Posted February 26, 2013 Share Posted February 26, 2013 I know in the past people have sometimes even just made it out of wood. I reckon you could possibly scratch build it out of styrene. Did you get anywhere with the mortar tube. That was the only thing other than the DLT-19 that I was gonna mention. It is a little too long at the top. Other than that its a cracking build mate. Really impressed. Nick Quote Link to comment Share on other sites More sharing options...
Ardkorian Posted February 26, 2013 Author Share Posted February 26, 2013 I will need to order new end caps and control panel, as they were polywelded to the mortor tube got plenty of tubing left to make a new one. will send TM a message to see if he can send me the bits. Quote Link to comment Share on other sites More sharing options...
Grantd1 Posted February 26, 2013 Share Posted February 26, 2013 **** sexy Glen - love the weathering! Oh & yes........I lurk min these shadows....one day a TD will be miine - MINE I SAY!!!!!! Quote Link to comment Share on other sites More sharing options...
nick.black Posted February 26, 2013 Share Posted February 26, 2013 **** sexy Glen - love the weathering! Oh & yes........I lurk min these shadows....one day a TD will be miine - MINE I SAY!!!!!! Hope so Grant would love to get you amongst the dirty ranks here. Nick Quote Link to comment Share on other sites More sharing options...
Grantd1 Posted February 27, 2013 Share Posted February 27, 2013 Hope so Grant would love to get you amongst the dirty ranks here. Nick Yeh my new RS is about done but if it doesn't give me the look I want (I sold my TM as it was a little stretched being 6' plus) I'm going dirty in the hope that the pauldron, etc. will offset the fit and pad it out a little........oh & seeing Glen in action at Manchester made me drool!! Just need a t-21 though rather than that pea-shooter mate!! Quote Link to comment Share on other sites More sharing options...
sir david Posted February 27, 2013 Share Posted February 27, 2013 NICE ONE Glenn ! welcome aboard ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.