Barking Dragon Posted May 17, 2009 Share Posted May 17, 2009 Hi Everyone, I am on my way to building up my MH/SB/Charlie back pack but am stuck with how much to take off the seed trays?? I tried to have a look at Mike's back pack build for pics but the link with his site is down If someone could please confirm whether to trim all the way down to the red line in my picture or leave it at the blue line, that would be great. Maybe even a close up picture of your MH/SB/Charlie seed trays completed would be a great help aswell. Thanks Dan Quote Link to comment Share on other sites More sharing options...
TD-1536 Posted May 17, 2009 Share Posted May 17, 2009 It's up. I recently switched web hosts and there was no 'www' resolution in the old link. Thanks for catching that, I just fixed it. http://www.tk1536.com/mh_backpack_instructions/page1.html Quote Link to comment Share on other sites More sharing options...
Barking Dragon Posted May 17, 2009 Author Share Posted May 17, 2009 It's up. I recently switched web hosts and there was no 'www' resolution in the old link. Thanks for catching that, I just fixed it. http://www.tk1536.com/mh_backpack_instructions/page1.html Sweet!! Thanks Mike, didn't realise how much I had come to rely on your web site for reference pics and more Looks like I need to sand down my seed trays more and try to get them more in the middle of the red and blue line. dan Quote Link to comment Share on other sites More sharing options...
Trooper Peter Posted June 28, 2009 Share Posted June 28, 2009 It's up. I recently switched web hosts and there was no 'www' resolution in the old link. Thanks for catching that, I just fixed it. http://www.tk1536.com/mh_backpack_instructions/page1.html Mike - your website is down again. I clicked onto the url and received this error message : "The webpage "www.tk1536.com" cannot be found DNS error occurred. Server cannot be found. The link may be broken." Quote Link to comment Share on other sites More sharing options...
TD_MD Posted July 10, 2009 Share Posted July 10, 2009 Mike - your website is down again. I clicked onto the url and received this error message : "The webpage "www.tk1536.com" cannot be found DNS error occurred. Server cannot be found. The link may be broken." i got it in Spanish.... Error de DNS: no se puede encontrar el servidor. ¡Vaya! Parece que este enlace está roto.Sugerencias: Volver a cargar la página más tarde Quote Link to comment Share on other sites More sharing options...
crashmann Posted October 20, 2009 Share Posted October 20, 2009 I've figured out how to trim the seed trays and get them to stay in position! The trays are shipped with a 1/4" lip all the way around the edge. If you try to butt the trays together with this lip, they'll never line up, nor will they stay in position. If you cut down the lip on both trays so they are completely flat, then the trays will slide apart, as evidenced by the "move along" backpack: So (although technically not exactly screen accurate), trim the lip on one tray: Now fit the flat edge of the tray inside the lip of the other: No matter how much you twist, flex, or try to slide the trays apart, they're not going to move. Tada! You'll still need to clean up the edge of tray with the lip, perhaps by taking it down to 1/8" tall. Then you need to figure out how you want to keep them closed - magnets, rivets, zip ties, glue, really long screws, hinges, the force, etc... Enjoy! Charlie 1 Quote Link to comment Share on other sites More sharing options...
Trooper Peter Posted February 7, 2010 Share Posted February 7, 2010 I've figured out how to trim the seed trays and get them to stay in position! The trays are shipped with a 1/4" lip all the way around the edge. If you try to butt the trays together with this lip, they'll never line up, nor will they stay in position. If you cut down the lip on both trays so they are completely flat, then the trays will slide apart, as evidenced by the "move along" backpack: So (although technically not exactly screen accurate), trim the lip on one tray: No matter how much you twist, flex, or try to slide the trays apart, they're not going to move. Tada! You'll still need to clean up the edge of tray with the lip, perhaps by taking it down to 1/8" tall. Then you need to figure out how you want to keep them closed - magnets, rivets, zip ties, glue, really long screws, hinges, the force, etc... Charlie, that's a good and innovative idea! This is what I'll be doing with my Top and Bottom pair of Seed Trays. Need your clarification on one point here - the better way to mount the Seed Trays onto the TD Backpack frame is for the untrimmed lip Tray to be facing up and covering the trimmed lip Seed Tray (where it will be attached to the Backpack frame), right? Or is it the other way round? Will appreciate your clarification on this one. Quote Link to comment Share on other sites More sharing options...
crashmann Posted February 7, 2010 Share Posted February 7, 2010 Need your clarification on one point here - the better way to mount the Seed Trays onto the TD Backpack frame is for the untrimmed lip Tray to be facing up and covering the trimmed lip Seed Tray (where it will be attached to the Backpack frame), right? Or is it the other way round? unsure.gif Good question Peter! Since we are "optimizing the backpack assembly, I recommend having the untrimmed lip on the outside of the backpack and mounting your components onto it, like this: The tray with the trimmed edge will be mounted to the backpack frame, on the inside of your pack, closest to your back. Charlie Quote Link to comment Share on other sites More sharing options...
Trooper Peter Posted February 7, 2010 Share Posted February 7, 2010 Good question Peter! Since we are "optimizing the backpack assembly, I recommend having the untrimmed lip on the outside of the backpack and mounting your components onto it, like this: The tray with the trimmed edge will be mounted to the backpack frame, on the inside of your pack, closest to your back. Charlie Charlie, thanks for your recommendations. I'll position my Seed Trays with the untrimmed lip to be on top /facing up and mount the necessary Backpack components on them. Yes and the Seed Trays with the trimmed lip gets attached to my TD Backpack frame. Quote Link to comment Share on other sites More sharing options...
Phoenix Posted December 4, 2015 Share Posted December 4, 2015 This may be an old post, but us new guys still use this one and other collectively to get our packs just right! Quote Link to comment Share on other sites More sharing options...
EvanDallas Posted May 10, 2016 Share Posted May 10, 2016 Bump for genius Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted May 10, 2016 Share Posted May 10, 2016 Wish I would have saw this before doing mine 1 Quote Link to comment Share on other sites More sharing options...
RumRunner Posted February 15, 2018 Share Posted February 15, 2018 Charlie is the Mann !!! 1 Quote Link to comment Share on other sites More sharing options...
TK Goatee Posted November 8, 2018 Share Posted November 8, 2018 Pretty neat Idea. This would help me a lot with my backpack build. Thanks for sharing. But, Newbie question incoming: is this method applicable for SWAT? Quote Link to comment Share on other sites More sharing options...
crashmann Posted November 8, 2018 Share Posted November 8, 2018 SWAT's goal is to emulate a particular sandtrooper from a particular scene. All of the photos of the sandtrooper backpacks show the seed trays have a flat edge, and that is why they are sliding apart and barely held together with gaffer's tape: So, if you're going for SWAT, do not leave the lip around one of the trays. Trim the trays so they are flat. Charlie 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.