Deublein Posted December 10, 2019 Share Posted December 10, 2019 Name: Chester Petersen TKID: TD-30055 - https://www.501st.com/members/displaymember.php?userID=23704&costumeID=2 MEPD forum name: Zahnism Garrison: Danish Garrison Off bucket: PS. This photo was taken after premier of "The Rise Of Skywalker" and had no time for run a comb though my beard -One full armor, helmet on, front photo. -One full armor, helmet on, right side photo. -One full armor, helmet on, left side photo. -One full armor, helmet on, back photo. -One full armor, helmet on, back photo without backpack. -Canvas or elastic shoulder straps detail photo. -Canvas belt detail photo with pouches. -Detail photos of the rubber gloves and latex handguards - Detail photos of all snaps, screws and buttons on the armor. Bucket (pictures can show details individually or in groups): -A close up photo clearly showing the flat green lenses. -Detail photo showing no stripes on all grey traps and tears. -Detail photo of frown, showing 4 teeth cut out and grey paint. -Detail photo of hovi-mix mic tips (or replica) mounted on helmet. -Detail photos of blue tube stripes. Backpack: - Detail photos from all sides, separately Chest canvas ammo bag: Weapons: -At leas one picture showing the whole weapon (E11). Finally: -One (or several) full body action (or attitude poses) good quality picture. Quote Link to comment Share on other sites More sharing options...
Hausi Posted December 11, 2019 Share Posted December 11, 2019 Hello Chester, welcome and thank you for your interest in joining the Empire´s deployed elite forces. Your application looks great, your gear suits you well and I dig your weathering, mate, well done. Just curious: is that Ross´s armor and an RS pack? Either Bigwam or myself will be taking care of your review but before we can begin, we will need to see some more pics: -a pic of the six rivets connecting kidney and ab section (I can see that they are there but I have to see a detail picture) -a pic of the back of the male snap at the top corner of the abdomen. - a pic of the rivet and back of the snaps connecting cod and butt piece. - could you provide a more detailed picture of your shoulder pouch please? I´m especally intereste if it´s canvas, it somehow looks like leather to me. I can already tell you that you will have to dirty up those elastics on the shoulders but that´s an easy job. So I am looking forward to seeing those pics added and to starting your review. Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 11, 2019 Author Share Posted December 11, 2019 5 hours ago, Hausi said: Hello Chester, welcome and thank you for your interest in joining the Empire´s deployed elite forces. Your application looks great, your gear suits you well and I dig your weathering, mate, well done. Just curious: is that Ross´s armor and an RS pack? Either Bigwam or myself will be taking care of your review but before we can begin, we will need to see some more pics: -a pic of the six rivets connecting kidney and ab section (I can see that they are there but I have to see a detail picture) -a pic of the back of the male snap at the top corner of the abdomen. - a pic of the rivet and back of the snaps connecting cod and butt piece. - could you provide a more detailed picture of your shoulder pouch please? I´m especally intereste if it´s canvas, it somehow looks like leather to me. I can already tell you that you will have to dirty up those elastics on the shoulders but that´s an easy job. So I am looking forward to seeing those pics added and to starting your review. Well hello there All pictures you requested is updatet in post zero. And yes, nice spottet trooper. Its a RWA Creation (Ross) armor + helmet and a RSpropmaster backpack. Looking forward to hear from you 1 Quote Link to comment Share on other sites More sharing options...
bigwam Posted December 12, 2019 Share Posted December 12, 2019 Hi Chester, great armor. What we need are two pics like this, to see the gap on the side: Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 12, 2019 Author Share Posted December 12, 2019 9 hours ago, bigwam said: Hi Chester, great armor. What we need are two pics like this, to see the gap on the side. Hi bigwam. Totally forgot those yesterday. Post zero updated Quote Link to comment Share on other sites More sharing options...
Hausi Posted December 12, 2019 Share Posted December 12, 2019 Hey Chester, welcome again! Thank you for providing the requested pictures so quickly and already improving some details. Now it´s time to start your real review, so let´s go: Application Review: Part 1 Name: Chester Petersen Legion ID: TD-30055 Forum Name: Zahnism Garrison: Danish Garrison Helmet a. Green lenses: check b. Paint color of traps / tears: check c. Correct number of teeth: check d. Mic tips: check e. Vocoder color: check f. Tube stripes: check g. Rank bar on ears: check h. Brow: check i. Side screws (ears): check j. Weathering: check *additional comments* Nice job on the helmet, you really nailed the sandy look. RESULT ON HELMET Checked & Cleared Armor details a. elastic straps shoulders: check b. neck seal: check c. black undersuit: check d. shoulder bells: check e. biceps: check f. forearms: check g. pauldron: check h. chest / back plate: see comments i. kidney / butt plate: check j. ab plate / side rivets / cod: see comments k. strapping system: see comments l. thighs: check m. shins / calves: check n. sniper plate: check o. boots: check p. gloves: check q. hand plates / guards: check r. ammo belt (waist): check s. ammo belt (right knee): see comments t. canvas belt: check u. pouches: see comments v. weathering: check *additional comments* I think that the gap between your biceps and forearms is a little big as the forearms seem to be rather short but I´m going to let this pass Chester, this isn´t anything which is going to hinder your deployment but I personally think that your forearm armor is too large, I´m pretty sure you could decrease the circumference, so your hand barely fits through the front opening. 1: The screws emulating the original screen-used strapping in the bottom returnedge of your chest aren´t evenly spaced. Have a look at the picture you can see that you can actually get away with relocating that one screw only, then fill up the hole with some ABS paste which is easy enough the fabricate: I hope you still have some ABS leftovers from trimming your armor, cut them into very small pieces and drown them in actone. 2: As you can see in the following picture, the rivet in the codpiece is missing, so please add it. Your codpiece also is shaped quite strangely but that is okay. 3: The rivet connecting the knee ammo belt to the thigh has to be relocated too (see the correct position highlighted with the red circle in the picture), so you can take some of that ABS brew to close the old hole too. 4: As I was already assuming, your shoulder pouch is made of leather. This would be okay for a deathtrooper but not for a sandtrooper. This style of pouches seen on screen was made of canvas (as shown in the left picture above). It is possible to use a different style of leather pouch for the shoulder too, please have a look at the CRLs to find out which one is acceptable. http://forum.mepd.net/index.php?/topic/16077-attention-new-po-crl%C2%B4s-for-td-valid-from-1172019/ RESULT ON ARMOR pending Backpack a. details: check b. weathering: check *additional comments* RESULT ON BACKPACK Checked & Cleared Weapon a. details: check b. weathering: check *additional comments* Your E-11 looks great, however, I always encourage people to take the next step and go full “Bapty” , I´m sure you know what I´m talking about. RESULT ON WEAPONS Checked & Cleared Chester, this was your first review! Keep up the good work, you are very close to deployment and I think those changes are manageable. I´m looking forward to seeing some new pics of your improved gear soon. Cheers mate Hausi - MEPD Deployment Officer 1 Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 13, 2019 Author Share Posted December 13, 2019 Why thanks for all those kind words. I have started to change the things you wrote and new ammo bag has been ordered (somehow i didint realize that the ammo bag should be canvas, weird) Will update post zero when the ammo bag has arrived 2 Quote Link to comment Share on other sites More sharing options...
MrFlavaFlave Posted December 14, 2019 Share Posted December 14, 2019 Almost there brother! Keep at it! 1 Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 21, 2019 Author Share Posted December 21, 2019 Well hello there.. again All errors have been fixed and post zero has been updated with new photos. You write "codpiece also is shaped quite strangely" - Thats for comfort. I had an Incinerator Trooper before and after a marathon the wide codpierce had made an 8 cm long and ½ cm deep wound on my inner thigh, after that i would never comprimise with comfort. Still have a nasty scar to remind me of those 1½ month where i could not walk normal. Thats why the weird shape Quote Link to comment Share on other sites More sharing options...
Hausi Posted December 23, 2019 Share Posted December 23, 2019 Hi Chester, I can completely understand when people alter their armor for added comfort and as long as it isn´t visible too much, everything´s fine. Kudos to you for running a marathon in your armor, that´s a serious challenge. Thank you for making the changes so quickly, good job. So let´s start with the second review: Application Review: Part 2 Name: Chester Peterson Legion ID: TD-30055 Forum Name: Zahnism Garrison: Danish Garrison Helmet a. Green lenses: check b. Paint color of traps / tears: check c. Correct number of teeth: check d. Mic tips: check e. Vocoder color: check f. Tube stripes: check g. Rank bar on ears: check h. Brow: check i. Side screws (ears): check j. Weathering: check *additional comments* RESULT ON HELMET Checked & Cleared Armor details a. elastic straps shoulders: check b. neck seal: check c. black undersuit: check d. shoulder bells: check e. biceps: check f. forearms: check g. pauldron: check h. chest / back plate: check i. kidney / butt plate: check j. ab plate / side rivets / cod: check k. strapping system: check l. thighs: check m. shins / calves: check n. sniper plate: check o. boots: check p. gloves: check q. hand plates / guards: check r. ammo belt (waist): check s. ammo belt (right knee): check t. canvas belt: check u. pouches: check v. weathering: check *additional comments* nice work with all those improvements, well done. RESULT ON ARMOR Checked & Cleared Backpack a. details: check b. weathering: check *additional comments* RESULT ON BACKPACK Checked & Cleared Weapon a. details: check b. weathering: check *additional comments* RESULT ON WEAPONS Checked & Cleared Chester, this was your second and final review! I always really appreciate when people are motivated, enthusiastic and keen on joining the deployed troops out there in the dune sea. It was a pleasure working with you. Your gear looks great and you are a worthy addition to the ranks of the MEPD´s finest. Be proud of yourself! You have successfully followed the guidelines in regards to the MEPD CRL and have met all requirements. Please send the pic you want to use to Luis (Sandman Tigui) and we'll get you squared away. We will have your updated information uploaded into the MEPD system very soon. Congratulations on becoming a Deployed Officer of the MEPD! Cheers mate and merry Christmas! Hausi - MEPD Deployment Officer 1 Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 23, 2019 Author Share Posted December 23, 2019 Freaking awesome And a merry christmas to you allso Quote Link to comment Share on other sites More sharing options...
519 Trooper Posted December 27, 2019 Share Posted December 27, 2019 Congratulations on the approval. 1 Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 27, 2019 Author Share Posted December 27, 2019 16 hours ago, 519 Trooper said: Congratulations on the approval. Thanks :) Quote Link to comment Share on other sites More sharing options...
Deublein Posted December 27, 2019 Author Share Posted December 27, 2019 On 12/23/2019 at 2:27 PM, Gordonator said: Well done Chester! Your Gold coin will be shipped after the holidays. Cheers awesome Quote Link to comment Share on other sites More sharing options...
MrFlavaFlave Posted December 29, 2019 Share Posted December 29, 2019 Congrats on your deployment. 1 Quote Link to comment Share on other sites More sharing options...
bigwam Posted December 29, 2019 Share Posted December 29, 2019 Great work! 1 Quote Link to comment Share on other sites More sharing options...
DarthStevius Posted December 30, 2019 Share Posted December 30, 2019 Well done Chester. Congratulations Brother 1 Quote Link to comment Share on other sites More sharing options...
Deublein Posted January 1, 2020 Author Share Posted January 1, 2020 On 12/30/2019 at 12:46 PM, DarthStevius said: Well done Chester. Congratulations Brother On 12/29/2019 at 5:03 PM, bigwam said: Great work! On 12/29/2019 at 6:13 AM, MrFlavaFlave said: Congrats on your deployment. Thanks guys Im very proud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.