TD 9366 Posted October 16, 2017 Share Posted October 16, 2017 Name: Kainan Zhu Legion ID: TD-9366 Forum Name: TR9366 Garrison: Chinese Garrison Applying for Road Block Captain "Move Along" Police Officer: Armour: AM 2.0 Helmet: ATA Pauldron: Trooper1 Boots: TK boots Gloves & Handguards: Trooperbay Blaster: Bapty Pouches: Found on Ebay Backpack: Trooperbay & Tosche Traders Pauldron: Backpack and details: Pouches: Rubber Gloves and Hand Guard: Rivets and snaps: Boots: Helmet: Bapty E-11 Some other photos: Quote Link to comment Share on other sites More sharing options...
bigwam Posted October 16, 2017 Share Posted October 16, 2017 Good luck for your review. I´m not sure but i mean, PVC Frames are not allowed for SWAT-Packs. Felice wrote in an other Review about a PVC-Pack: " You used an old backpack Setup which is no longerup to SWAT Standards anymore. The current SWAT packs require the correct Karrimor frame (or an adequate replica like the one from Michael Seeger) and also are not allowed to show any connection tubes." But wait for the comment from felice. Quote Link to comment Share on other sites More sharing options...
Hausi Posted October 16, 2017 Share Posted October 16, 2017 Looks good, nice work on the bapty and great weathering mate! Are this Trooper's shoes really that dirty? Thomas/bigwam is probably right about your backpack frame though. Good luck with your review! Quote Link to comment Share on other sites More sharing options...
LoveMonkey Posted October 16, 2017 Share Posted October 16, 2017 Looking really nice, good luck Quote Link to comment Share on other sites More sharing options...
m4vrick Posted October 17, 2017 Share Posted October 17, 2017 One very noticeable one for me: stinger is too long, might wanna insert a bamboo/ something solid & straight to straighten it out. Tupperware lid needs a bolt on it too.Your weathering is awesome!Good luck sir! Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
TD42115 Posted October 17, 2017 Share Posted October 17, 2017 Your weathering is great, good luck on review Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted October 24, 2017 Author Share Posted October 24, 2017 Thank you for your adivices! Quote Link to comment Share on other sites More sharing options...
Felice Posted November 2, 2017 Share Posted November 2, 2017 Hi Kainan, sorry for the late beginning of your review. I just had some access problem to our forum. I will start your full review at the weekend! See you and Cheers, Felice Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted November 4, 2017 Author Share Posted November 4, 2017 On 2017/11/3 at 0:00 AM, Felice said: Hi Kainan, sorry for the late beginning of your review. I just had some access problem to our forum. I will start your full review at the weekend! See you and Cheers, Felice No problem Felice, thank you:) Quote Link to comment Share on other sites More sharing options...
Felice Posted November 5, 2017 Share Posted November 5, 2017 Hi Kainan! Today I just can give you a short and dirty review because my movie picture database is on another PC. Ok? Your gear is on spot and your emulated trooper is immediately recognizable. But each new SWAT candidate gets looked at even more so from the previous trooper and the bar gets raised even higher. You are definitely on the right track though. As stated before, we always stress patience during this process as we pay more and more attention to fine tuning with each new SWAT applicant. The MEPD Senior Commanders and myself will give your armor a full inspection and review. Some details may definitely be missed and re-checked, but we will try to catch them on every pass given until you are cleared and ready to join the Special Weapons & Tactics Team, brother! With that said, let us begin......... So let's start...... MEPD SWAT OFFICER: Application review part 1 Name: Kainan Zhu Legion ID: 9366 Forum Name: TR9366 Garrison: Chinese Garrison ANH Santrooper selected: Road Block Captain Move along Helmet Green Lenses: Paint Color on Traps / Tears: Paint Color and Number of Teeth: Mic Tips: Vocoder Color: Tube Stripes: Rank Bar: Brow: Side Screws (ears): Weathering: Specials (ears): **Additional comments** **RESULT ON HELMET** STAND BY Armor / Suit Details Canvas Straps: see comments Neck Seal: check Black Undersuit: check Shoulder Bells: see comments Biceps: check Forearms: see comments Pauldron: Chest / Back Plate: check Kidney / Butt Plate: check Ab Plate / Side Rivets / Cod: check Strapping: see comments Tighs: check Shins / Calves: check Sniper Plate: check Boots: see comments Gloves: check Ammo Belt (Waist) w/ correct Angled Edge: check Ammo Belt (right knee): check Canvas Belt: check Pouches: check Weathering: see comments Crotch Snaps: check **Additional Comments** Canvas straps: I have to see them dude Shoulder bells: the black strapping inside is missing Forearms: the position is wrong, flip them inside strapping: please show me the whole strapping of you main armor weathering: pending. the spots are right but for me they seems to be too strong. I will need my database:-) boots: too much weathering **RESULT ON ARMOR** STAND BY Backpack Details: see comments Weathering: check **Additional Comments** The bee stinger is too long The sling holders for the radio have the wrong form/structure The frame of the backpack has to be a Karrimor frame or similar one. The Tupperware "sunshine" lid is hold via a bolt **RESULT ON BACKPACK** PENDING Weapon: E-11 Tunisia Blaster Details: check Weathering: check **Additional Comments** **RESULT ON WEAPON** APPROVED Alright Kainan! This was the first quick and dirty Review. We will see us in the next view days with some pictures from me Take care mate and if you need more advice or some help I will be there for you! Cheers, Felix Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted November 6, 2017 Author Share Posted November 6, 2017 Thank you for your review Felix. About the weathering, maybe it's because the lamp light is too yellow, I'll try taking more pics in the daylight later for reference. Quote Link to comment Share on other sites More sharing options...
Felice Posted November 6, 2017 Share Posted November 6, 2017 Hi Kainan! I am ready:-)! So let's start...... MEPD SWAT OFFICER: Application review part 2 Name: Kainan Zhu Legion ID: 9366 Forum Name: TR9366 Garrison: Chinese Garrison ANH Santrooper selected: Road Block Captain Move along Helmet Green Lenses: check Paint Color on Traps / Tears: check Paint Color and Number of Teeth: check Mic Tips: see comments Vocoder Color: check Tube Stripes: check Rank Bar: check Brow: check Side Screws (ears): check Weathering: see comments Specials (ears): see comments **Additional comments** Mic tips: please show me a detail picture of the inside Weathering and Ears: please check the missing dots and the scratch on the right side **RESULT ON HELMET** Pending Armor / Suit Details Canvas Straps: see comments Neck Seal: check Black Undersuit: check Shoulder Bells: see comments Biceps: check Forearms: see comments Pauldron: check Chest / Back Plate: check Kidney / Butt Plate: check Ab Plate / Side Rivets / Cod: check Strapping: see comments Tighs: check Shins / Calves: check Sniper Plate: check Boots: see comments Gloves: check Ammo Belt (Waist) w/ correct Angled Edge: check Ammo Belt (right knee): check Canvas Belt: check Pouches: check Weathering: see comments Crotch Snaps: check **Additional Comments** Canvas straps: please show me a detail picture of the canvas strap Shoulder bells and forearms: the black strapping inside is missing and the black tape on the bell. Twist the forearms strapping: please show me the whole strapping of you main armor weathering: the patterns of your armor identify this exactly. But the armor is too dirty (e.g. the shins, the handguards, on the abdomen, etc). I will show you some references: boots: too much weathering **RESULT ON ARMOR** Pending Backpack Details: see comments Weathering: check **Additional Comments** You definitly have to build a new pack or better: a new frame. Attention! some measurements will be changing. Here are some major topics (the rest on the pictures): -The bee stinger is too long - The sling holders for the radio have the wrong form/structure - The frame of the backpack has to be a Karrimor frame or similar one. - The Tupperware "sunshine" lid is hold via a bolt **RESULT ON BACKPACK** PENDING Weapon: E-11 Tunisia Blaster Details: check Weathering: check **Additional Comments** **RESULT ON WEAPON** APPROVED Ok Kainan! This was the first full depth Review. If you need any support just ask, ok? I am here:) Good luck and Cheers, Felix Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted November 7, 2017 Author Share Posted November 7, 2017 Thanks again Felix. Your comments are really helpful! Looks like the back pack is quite a big problem... I'll consider making a new one with better parts. It's not so convenient for me to find everything in China, so it may take some time. But I'll be back when I'm ready! Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted June 6, 2018 Author Share Posted June 6, 2018 Hi Felix, I'm back. Finally got all my new parts ready and starting the work. Before that I have a question: On 2017/11/6 at 8:58 PM, Felice said: - The sling holders for the radio have the wrong form/structure Would you please let me have a reference picture for that? Thank you. Quote Link to comment Share on other sites More sharing options...
bigwam Posted June 6, 2018 Share Posted June 6, 2018 Look here: Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted June 7, 2018 Author Share Posted June 7, 2018 21 hours ago, bigwam said: Look here: Thanks Thomas! Quote Link to comment Share on other sites More sharing options...
SID Posted July 5, 2018 Share Posted July 5, 2018 Some more work and a reward. Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted September 1, 2018 Author Share Posted September 1, 2018 Thank you guys, for all your help and patience I've been through a very busy time and finally got chance to take some photos, please let me know if you have any suggestions. Helmet : Mic tips: white inside Wheathering and Ears: fixed the missing dots and the special ear Armor / Suit Details Canvas Straps: Shoulder Bells and Forearms: the black tape on the bell added; adjusting the angle of forearms Strapping: Boots: Less weathering on the boots Weathering: less weathering on the armor Backpack The bee stinger cutted; The new sling holders for the radio; New Karrimor frame; Bolt on the Tupperware "sunshine" lid added; The tapes on the left fixed. Quote Link to comment Share on other sites More sharing options...
bigwam Posted September 1, 2018 Share Posted September 1, 2018 Look, this is wrong. You must fix the elastic band with a snap fastener. And the snap fastener must been sewn.: Quote Link to comment Share on other sites More sharing options...
Hausi Posted September 1, 2018 Share Posted September 1, 2018 Hey Kainan, good to see you're back! Nice progress on your new pack mate! Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted September 2, 2018 Author Share Posted September 2, 2018 7 hours ago, bigwam said: Look, this is wrong. You must fix the elastic band with a snap fastener. And the snap fastener must been sewn.: Yes sir! Quote Link to comment Share on other sites More sharing options...
bigwam Posted September 2, 2018 Share Posted September 2, 2018 Good morning Kainan,I will do the review of your trooper.Please be patient, I have to try my database to make some adjustments.Please take a few pictures of your backpack. From all sides and a few detail pictures.Many Thanks, bigwam Quote Link to comment Share on other sites More sharing options...
TD 9366 Posted September 2, 2018 Author Share Posted September 2, 2018 Adding more pics of my backpack for your reveiw: Quote Link to comment Share on other sites More sharing options...
bigwam Posted September 3, 2018 Share Posted September 3, 2018 Ok Kainan, so let´s go. First, let me say, the "move along trooper" is the TD with the most reference pics from helmet, armor and backpack. The quality of the pics are better, since BluRay, HD and so on. A lot has happened in the last few months. New material was discovered, new findings made. There is more work for every new SWAT-Candidate ... and more work for us for the review. So, it needs time, to do the review. Please be patient. And do not be angry with me if I complain something - the requirements increase with the quality of the pictures. Ok, i said, it is a lot of work and i need time, to do it. So i do the review one by one. First, i will start with the Backpack: Backpack Details: see comments Weathering: check **Additional Comments** First, let me say, you have done a lot of work on your pack, great! But like i said, there are some good and high quality pics, where you can see some differences: - Please shorten your bottles. They are to long. - change the Tupperware pudding cups against Rubber cups from a rubber toliettplunger (a new detail, that was found out). (see the pics) - look at the position of the bottle too, it is shorter than the radar dish. - also a new detail: there are no syphons with cable ties as ribs allowed. There are now many manufacturers who copy the shire very well. Note: Watch the length! On the "Move along Pack" is a Shires UP90, it is a little bit shorter than a UP100 (2,5 cm). - you've cut the detail on the mortar tube to clean. A praise to your work, but they worked not so good on the original backpack. Look, the corners are sharp, the cuts crooked: - there is also a glue spot on the Mortar tube: - the position of the tape is wrong. Look, yours makes an arrow down, the original one arrow up: - the kink in the karrimor frame is bigger: - the gape between the shotgunshells is bigger: - left side of the Pack: - there is some blue/grey primary colour on the brexton box visible - there is some red primary colour visible on the crossbelt of the Karrimor frame. - put your radio a little big higher. So, the gap is smaller between Radio and Brexton Box. - the holder of the Gio-Style is black: - there are some scratches and abraisons on the frame, not all is black. - please mount the leather straps on the bottom of the radio So, this is the first Part of my review. There is something to do, but you can do it. I´m sure. For some help, look at this Thread from strider: Kainan, let´s go - you can do it. Best Regards bigwam. 1 Quote Link to comment Share on other sites More sharing options...
bigwam Posted September 6, 2018 Share Posted September 6, 2018 Ok Kainan, here is Part 2 of my Review: the Helmet: Helmet Green Lenses: check Paint Color on Traps / Tears: check Paint Color and Number of Teeth: check Mic Tips: see comments Vocoder Color: check Tube Stripes: check Rank Bar: check Brow: check Side Screws (ears): check Weathering: see comments Specials (ears): see comments **Additional comments** 1. Please check the markant Spots: 2. - Please draw the black lines a little bit thicker - the chipped paint around the scratch makes it stand out/makes it seem more pronounced 3. - look at the eyes, they are not round - more angular. - Trapeze: paint more in the corner 4. - Mictips: only the inner circle is white: 5. the same as on the right side: note the gaps at the ear and the corner in the eye: Kainan, again only a few little things, but the special make the helmet! I think that will not be a problem for you! Best Regards bigwam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.