Dutch Dirty Trooper Posted March 15, 2018 Share Posted March 15, 2018 Hi all, i was studying this pack and have some questions about it. Please don't shoot me if some of these we're already asked or discovered but i always like to learn more about TD's As you can see on the picture i've highlighted 4 points was wondering about : 1 On the side of his black seedtray i see somekind for me a unknown kind of part ? What is this ? As far i see there's also ducktape around this ? 2 What is this sling for ? Connected to his MG or part of his backpack to carry it ? 3 You can see two iron rings on this picture is this connected to his backpack and / or sling ? 4 Lot of ducktape around his lower seedtray is this also accepted for CRL as i think about the details I hope some can help me out and hope you all don't mind asking you this as i want to learn as much as possible about the Sandies Quote Link to comment Share on other sites More sharing options...
henselmonster Posted March 15, 2018 Share Posted March 15, 2018 1. I am not sure what it is but it looks similar to what @gino had on his newest pack to hold his capacitors. 2. I think that may be part of the backpack strap. I could be wrong. 3. Those rings are used to hold the pack straps on a karrimor frame. 4. If you can see it on screen it is accepted in the CRL for packs! In fact that detail would be absolutely required for SWAT hope that kind of helps. I’m very curious about #1 Quote Link to comment Share on other sites More sharing options...
Dutch Dirty Trooper Posted March 15, 2018 Author Share Posted March 15, 2018 21 minutes ago, henselmonster said: 1. I am not sure what it is but it looks similar to what @gino had on his newest pack to hold his capacitors. 2. I think that may be part of the backpack strap. I could be wrong. 3. Those rings are used to hold the pack straps on a karrimor frame. 4. If you can see it on screen it is accepted in the CRL for packs! In fact that detail would be absolutely required for SWAT hope that kind of helps. I’m very curious about #1 Many thanks for your reply Always nice to learn and share thoughts with eachother.. Indeed #1 making me think alot about what that is...maybe others can help out with this one also Again many thanks Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 15, 2018 Share Posted March 15, 2018 I've seen someone 3D print a part that's #1. I can't seem to find it right now but I remember a pack build featuring it. It's not the same as the capacitor holder. Quote Link to comment Share on other sites More sharing options...
henselmonster Posted March 15, 2018 Share Posted March 15, 2018 Here were a couple shots I got at celebration of @gino's move along pack. His capacitor holders looks pretty similar. But then again, fan made so who knows if they are accurate. Maybe if Gino stops by he could chime in on the part. Quote Link to comment Share on other sites More sharing options...
Dutch Dirty Trooper Posted March 15, 2018 Author Share Posted March 15, 2018 1 hour ago, Airborne Trooper said: I've seen someone 3D print a part that's #1. I can't seem to find it right now but I remember a pack build featuring it. It's not the same as the capacitor holder. Thanks for your reply Quote Link to comment Share on other sites More sharing options...
Dutch Dirty Trooper Posted March 15, 2018 Author Share Posted March 15, 2018 14 minutes ago, henselmonster said: Here were a couple shots I got at celebration of @gino's move along pack. His capacitor holders looks pretty similar. But then again, fan made so who knows if they are accurate. Maybe if Gino stops by he could chime in on the part. Thanks for sharing looks similar indeed..many thanks for helping out so far Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 15, 2018 Share Posted March 15, 2018 I'm thinking of a different pack. Those look like those plastic retainer clips that Tie Pilots have on their helmets. Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 15, 2018 Share Posted March 15, 2018 I was thinking about Pack #5 aka Filter pack. The greeblie that goes on the side of the Brexton box Quote Link to comment Share on other sites More sharing options...
Dutch Dirty Trooper Posted March 15, 2018 Author Share Posted March 15, 2018 38 minutes ago, Airborne Trooper said: I was thinking about Pack #5 aka Filter pack. The greeblie that goes on the side of the Brexton box Wow...thanks for your reply..think that's indeed the part we're looking for ..many thanks everyone so far for ya help Quote Link to comment Share on other sites More sharing options...
m4vrick Posted March 15, 2018 Share Posted March 15, 2018 2. I believe those are just slings of the Karrimors. 3. Yupe those are rings and the Karrimors come with them: Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 15, 2018 Share Posted March 15, 2018 Interesting, mine just have the 2 rings on each side. I don't have that buckle portion. Quote Link to comment Share on other sites More sharing options...
henselmonster Posted March 15, 2018 Share Posted March 15, 2018 13 minutes ago, Airborne Trooper said: Interesting, mine just have the 2 rings on each side. I don't have that buckle portion. I have that bucket on my frame with the squared (|_|) bottom, but not the trapezoid one (\_/) Quote Link to comment Share on other sites More sharing options...
RoCKo Posted March 15, 2018 Share Posted March 15, 2018 4 hours ago, Airborne Trooper said: I'm thinking of a different pack. Those look like those plastic retainer clips that Tie Pilots have on their helmets. I was thinking he same and have looked since Gino posted but haven't found anything yet! Btw. The retaining clips used on the Tie helmets look like this... Shape and sizewise the complete part looks a lot like a slot a or slap 1 heat sinks used on cpu's orgrafoc cards in vintage computers. Still i couldn't find the correct part and i'm still not sure if i am on the right path.... Maybe Gino can chime in but normally he won't share so who knows.... Quote Link to comment Share on other sites More sharing options...
Airborne Trooper Posted March 15, 2018 Share Posted March 15, 2018 Wasn't Strider the one who pointed Gino in the right direction for that build? I personally don't understand withholding information in this community. Quote Link to comment Share on other sites More sharing options...
henselmonster Posted March 15, 2018 Share Posted March 15, 2018 23 minutes ago, Airborne Trooper said: Wasn't Strider the one who pointed Gino in the right direction for that build? I personally don't understand withholding information in this community. Yea, I think sharing all findings would only help, but at the same time I understand. He has his hands in so many different projects and probably has dozens of signed NDAs. He probably doesn't want to share just to cover all his bases on a legal level. I can sympathize, I too occasionally fear the mouse. But none of my projects have anything to do with Sandtroopers so I think I'm good lol Quote Link to comment Share on other sites More sharing options...
Dutch Dirty Trooper Posted March 17, 2018 Author Share Posted March 17, 2018 On 15-3-2018 at 8:46 PM, Airborne Trooper said: I personally don't understand withholding information in this community. Agree ! I think it's all about to help eachother and pointing into the '' right '' direction Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.