Jump to content

*ACTIVATED* TD-11038/ RHAPSODYRED99 / SWAT OFFICER # 019


rhapsodyred99
 Share

Recommended Posts

Name: Frank Craighead

Legion ID #: TD-11038

Forum Name: Rhapsodyred99

Garrison: Tyranus

Trooper Emulated: Road Block captain (pre break) Move along trooper

Weathering style: Raw Umber multiple layer wash, with direct color applied and sanded

Armor: RS Propmasters

Boots TK Boots

Gloves: Black Chemical gloves

Handguards: Karin's white rubber

Blaster Demilled Sterling, real hengstler, real M-38 Scope

Armor Photos:

Posted ImagePosted ImagePosted ImagePosted ImagePosted Image

Member must currently be deployed as an MEPD Police Officer to be considered. - yes

Weathering must be appropriate to screen used armor. Too little or too much weathering will not be allowed. - yes

Pack, pauldron, and weapon combinations must match a specific trooper a seen on screen. - yes

Pauldrons must be of the accurate “puffy” variety. Older style/flat and brightly/off color pauldrons are not allowed.

Posted Image

Packs must have the appropriate details for the specific trooper which is being referenced.

Posted ImagePosted ImagePosted ImagePosted ImagePosted Image

Pouches must be of the correct construction, color, and materials as reference trooper.

Posted ImagePosted Image

Rivets on the left side of the ab/kidney plates: a total of six rivets with three on the ab and three on the kidney plate, equally spaced out along the depth of the armor .

Posted Image

One snap on the top right hand side oft he ab plate: back of male side of snap should show on outside of ab plate.

Posted Image

Visible fasteners under crotch area. Two (or 3) male snaps in the back and one split rivet or brad in the front. (not required to be functional)Posted Image

Flexible shoulder straps

Posted Image

FXhelmets, MRCE and/or ANHv2 helmets are not allowed.

Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image

Hasbro blasters are not allowed, even conversions.

Posted ImagePosted ImagePosted ImagePosted ImagePosted Image

Post at least one "action" image. This photo should be taken of you from the waist up on a blank, non-colored wall (i.e., such as white, beige, grey, etc.) This photo should be taken and available in high-resolution for the deployment photo.

Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image

Whew!

I know I will probably need to get a few more shots of some details, but hopefully this can start off the process!

Of all my costumes(all 4 OT Tks woot! :trooper: ) this is the one I am most proud of, who knew getting dirty would be so much work (and fun! :td: ) If I did anything right, it is from all the help and support to be found here, any mistakes are my own...

Thanks for considering my Application.

Link to comment
Share on other sites

Hi, Frank,

Thank you for submitting your request for SWAT Activation.

Although you have chosen a very popular TD for the process, it is always great to see different interpretations on the design and yours looks to be very exceptional.

With that said, there may be a few tweaks that need to be taken care of. Details that need to be even more fine tuned in comparison to the standard Deployed Officer.

We always stress patience during this process

Let's begin...

MEPD SWAT OFFICER: APPLICATION REVIEW (PART 1)

Name: Frank Craighead

Legion ID #: TD-11038

Forum Name: Rhapsodyred99

Garrison: Tyranus

** ANH SANDTROOPER SELECTED **: Roadblock Captain (Pre-Break) / "Move Along" TD

I.) HELMET:

a.) Green Lenses -- CHECK

b.) Paint Color on Traps / Tears -- CHECK

c.) Number Of Teeth -- (4) Correct for Version Selected: CHECK

d.) Mic Tips -- CHECK

e.) Vocoder Color (Black) -- CHECK

f.) Tube Stripes -- CHECK

g.) Rank Bar -- CHECK

h.) Brow -- CHECK

i.) Side Screws (Ears): CHECK

j.) Weathering: CHECK

** Additional Comments --

A.) DEPLOYMENT OFFICER:

Fantastic helmet build, My Friend. Great work! :td::thumbsup:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

II.) Armor / Suit Details:

a.) Canvas Straps -- CHECK

b.) Neck Seal -- CHECK

c.) Black Undersuit -- CHECK

d.) Shoulder Bells -- CHECK

e.) Biceps -- CHECK

f.) Forearms -- CHECK

g.) Pauldron -- CHECK

h.) Chest / Back Plate -- CHECK

I.) Kidney / Butt Plate -- CHECK

j.) Ab Plate / Side Rivets / Cod -- CHECK

k.) Thighs -- CHECK

l.) Shins / Calves -- CHECK

m.) Sniper Plate -- CHECK

n.) Boots -- CHECK

o.) Gloves -- CHECK

p.) Hand Plates / Guards -- (SEE COMMENTS)

q.) Ammo Belt (Waist) w/ correct Angled Edge -- CHECK

r.) Ammo Belt (Right Knee) -- CHECK

s.) Canvas Belt -- CHECK

t.) Pouches -- CHECK

u.) Weathering -- CHECK

v.) Crotch Snaps -- CHECK

** Additional Comments --

A.) DEPLOYMENT OFFICER:

Please submit a close up pic of your left hand glove and guard. Preferably a top shot. Need to verify detail.

Posted Image

Posted Image

Posted Image

B.) EXECUTIVE OFFICER:(Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

III.) BACKPACK: VERSION # 3 (Move Along)

a.) Details -- (See Comments)

b..) Weathering -- CHECK

A.) DEPLOYMENT OFFICER:

This is an excellent build overall, Troop. Kudos!

My only mod request on this is to butt the top trays closer to the bottom trays and adjust the black tape placement to match the position of the reference pics.

(See below)

Posted Image

Posted Image

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

IV.) WEAPON: E-11

a.) Details -- CHECK

b..) Weathering -- CHECK

** Additional Comments --

A.) DEPLOYMENT OFFICER:

Fine weapon. Excellent authentic details / parts. Nothing more to say here. :td::yes:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

Link to comment
Share on other sites

Please submit a close up pic of your left hand glove and guard. Preferably a top shot. Need to verify detail.

Posted Image

Posted Image

Posted Image

Good lord, I have been using this shot for reference on the left handguard:

Posted Image

(this is a pic from a previous weather version but you get the idea)

Posted Image

totally missing the obvious reference photo you posted that shows prebreak he had a totaly different handguard! :ohmy:

all I can say is DO'OH! is my face red.....

Not a disaster however, because I got a second set of Karin's handguards just in case I did something disasterous to the first set, so in theory it should be as simple as weathering up the correct handguard.

As far as the pack goes, that will take some thought as when the pack is flat the trays are touching. It is when I put it on the PVC frame flexes over my back and causes an inch or two gap. I will need to experiment with preflexing and redoing the trays, or stiffening up the frame, or a combo of both. Just will take a little thought to work out. As far as the tape, easy to move that no worries there.

Thanks for the comments so far, I will start working on the mods once I get back into town and hopefully will have some new pics up as soon as I can.

:salute:

Link to comment
Share on other sites

Thanks guys!

I ended up completely removing the lower tray from the frame, removing the radio, siphon and old tape. I then retaped hopefully more inline with the canon and reassembled it all and got rid of any gap in the trays.

I was not able to book Roscoe to help out, but hopefully this will pass muster :) (love your posts Oscar!)

Posted Image

Posted Image

Hopefully this was what was needed.

Link to comment
Share on other sites

Hi, Frank!

Thanks for completing the requested mods. :yes:

The CO and XO will now give their final inspection and the decision will be made. Please standby on that.

For the meantime, I just want to say Great work! :td::thumbsup:

MEPD SWAT OFFICER: APPLICATION REVIEW (PART 2)

Name: Frank Craighead

Legion ID #: TD-11038

Forum Name: Rhapsodyred99

Garrison: Tyranus

** ANH SANDTROOPER SELECTED **: ROADBLOCK CAPTAIN / "MOVE ALONG" TROOPER (Pre-Break)

I.) HELMET:

a.) Green Lenses -- CHECK

b.) Paint Color on Traps / Tears -- CHECK

c.) Number Of Teeth -- (4) Correct for Version Selected: CHECK

d.) Mic Tips -- CHECK

e.) Vocoder Color (Black) -- CHECK

f.) Tube Stripes -- CHECK

g.) Rank Bar -- CHECK

h.) Brow -- CHECK

i.) Side Screws (Ears): CHECK

j.) Weathering: CHECK

** Additional Comments --

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

II.) Armor / Suit Details:

a.) Canvas Straps -- CHECK

b.) Neck Seal -- CHECK

c.) Black Undersuit -- CHECK

d.) Shoulder Bells -- CHECK

e.) Biceps -- CHECK

f.) Forearms -- CHECK

g.) Pauldron -- CHECK

h.) Chest / Back Plate -- CHECK

I.) Kidney / Butt Plate -- CHECK

j.) Ab Plate / Side Rivets / Cod -- CHECK

k.) Thighs -- CHECK

l.) Shins / Calves -- CHECK

m.) Sniper Plate -- CHECK

n.) Boots -- CHECK

o.) Gloves -- CHECK

p.) Hand Plates / Guards -- CHECK

q.) Ammo Belt (Waist) w/ correct Angled Edge -- CHECK

r.) Ammo Belt (Right Knee) -- CHECK

s.) Canvas Belt -- CHECK

t.) Pouches -- (2) MP-38/40 Leather Pouch / (1) MP-38/40 Canvas Pouch-- CHECK

u.) Weathering -- CHECK

v.) Crotch Snaps -- CHECK

** Additional Comments --

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER:(Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

III.) BACKPACK: VERSION # 3 ("Move Along")

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

IV.) WEAPON: E-11

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.) EXECUTIVE OFFICER: (Comments Pending)

C.) COMMANDING OFFICER: (Comments Pending)

**FINAL REVIEWS/COMMENTS COMING (X.O. and C.O.)

Link to comment
Share on other sites

:)

I worked hard to get it right from the start of the TK-TD conversion.

I could not have done it without the help and support found here.

I knew how to build a TK (as my sig implies), but would have never been able to pull off an accurate build without my brothers here.

If the process goes fast you have only yourselves to blame for being so darn good at pointing me in the right direction... :peace::pint1::duim::yes:

Link to comment
Share on other sites

Awesome!

A lot has been said about building an armor to SWAT in one try vs correcting it over time. Your build shows once more that doing things from the first time always pays off!!!

Congrats bro. You have an awesome armor. An awesome Sandtrooper.

This is my same choice, and I can spot an upgrade or two I need to make. The bar goes higher with every submission no doubt.

Thx for sharing and inspiring us.

Congrats on your build.

Saludos.

Juan.

Link to comment
Share on other sites

They are both backwards on the post break version seen in this pic:

Posted Image

But on the pre break version he has this left handplate:

Posted Image

I had originally had both plates on backwards because I was using the first pic as a reference, but after seeing the second pic I realized my mistake since I was going for the pre break look and redid the left glove.

Link to comment
Share on other sites

Awesome!

A lot has been said about building an armor to SWAT in one try vs correcting it over time. Your build shows once more that doing things from the first time always pays off!!!

Congrats bro. You have an awesome armor. An awesome Sandtrooper.

This is my same choice, and I can spot an upgrade or two I need to make. The bar goes higher with every submission no doubt.

Thx for sharing and inspiring us.

Congrats on your build.

Saludos.

Juan.

Thank you so much for the kind words.

It is a great feeling of satisfaction to know your hard work paid off.

I honestly never would have been able to even attempt this conversion if not for the direct help and feedback , and very helpful threads posted by the MEPD Brotherhood. I am so proud to be a part of this community.

I wimped out and chose a popular well documented TD, but for all my life when I have thought of Sandtroopers, I have thought the lines "Move along, move along".....(ok, ok and "look sir droids!" :P) When I decided to get dirty, I knew I wanted SWAT level. Before I put any dirt on the armor I poured over helmet shots and pack/pouch configurations, and kept comming back to the Iconic Move along...Move along....Sometimes ya gotta go with what keeps hitten ya in the head ya know? :P

Thanks again all...I eagerly await official comments. I know real life comes first, so no worries :):td::thumbsup:

Link to comment
Share on other sites

Frank, Please standby for final comments from the C.O. :td::thumbsup:

MEPD SWAT OFFICER: APPLICATION REVIEW (PART 3)

Name: Frank Craighead

Legion ID #: TD-11038

Forum Name: Rhapsodyred99

Garrison: Tyranus

** ANH SANDTROOPER SELECTED **: ROADBLOCK CAPTAIN / "MOVE ALONG" TROOPER (Pre-Break)

I.) HELMET:

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.)EXECUTIVE OFFICER:

** CHECKED AND CLEARED **

C.) COMMANDING OFFICER: (Comments Pending)

II.) Armor / Suit Details:

** Additional Comments --

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.)EXECUTIVE OFFICER:

** CHECKED AND CLEARED **

C.) COMMANDING OFFICER: (Comments Pending)

III.) BACKPACK: VERSION # 3 ("Move Along")

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.)EXECUTIVE OFFICER:

** CHECKED AND CLEARED **

C.) COMMANDING OFFICER: (Comments Pending)

IV.) WEAPON: E-11

A.) DEPLOYMENT OFFICER:

** CHECKED AND CLEARED **

B.)EXECUTIVE OFFICER:

** CHECKED AND CLEARED **

C.) COMMANDING OFFICER: (Comments Pending)

**FINAL REVIEWS/COMMENTS COMING FROM C.O.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...