dashrazor Posted February 7, 2012 Share Posted February 7, 2012 i have been experimenting with different methods of painting helmet details,, though i prefer using my airbrush, i know that a lot of people don't own one so i made up this tutorial on painting helmet details with common spray-paints and masking tape with minimal bleed one of the disadvantages of using spray paints over an airbrush is the bleed. an airbrush can apply super thin controlled coats and does not soak the areas you paint.. spray can paints tend to cause bleeding because they are applied too thick and the viscosity can not be altered like airbrush paints.. this method i discovered seems to help eliminate 99% of the bleeding.. by applying a clear primer before adding the paint it essentially seals most of the gaps in the masked off areas making it harder for the paint to "leak" under your masking tape (you will always get some bleed with any type of spray-paint) the trick is to eliminate as much as you can tips to eliminate paint bleed 1: always use good quality masking tape (do not use dollar store or no-name brands) 2: use a round edge tool to press down all the masked off edges (like the back side of a artist paintbrush) make sure it is plastic or wood so you don't scratch up your bucket 3: make sure you thoroughly cover areas that you don't want to paint... never skimp on the masking tape (more is better) 4: temperature is important!! try to paint on a cool day or night (heat makes most paint thinner and more likely to bleed) if it is a really hot sunny day find a shaded area to paint.. do not paint inside, you will get dizzy MATERIAL LIST 1: masking tape (i used normal 3M masking from wal-mart but automotive masking works best) 2: plastic grocery bags 2-3 3: exacto knife or razor blade 4: pencil (with eraser) 5: small paint brush 6: transparent plastic primer 7: black, gray and blue spray-paint 8: small artists easel or helmet stand (just something to hold the helmet up) here is the vids of painting an ATA helmet... Enjoy! i cant get the videos to post up so here is the link to my youtube channel photos of the finished helmet (i used a normal pencil eraser to easily remove the small bleeds that i got) also not the color in the photo looks darker than it actually is.. we have no sunlight in Maine lol Quote Link to comment Share on other sites More sharing options...
FIVE Posted February 7, 2012 Share Posted February 7, 2012 Nice stuff man! Thanks for sharing it here too. Quote Link to comment Share on other sites More sharing options...
iconoclasta_88 Posted February 10, 2012 Share Posted February 10, 2012 GREAT! I am more a hand painted details guy, but this will be very handy when giving options to troopers looking for techniques to get their armor done! I have always had problems with paint bleeds, the plastic primer is a great idea. I guess it would work the same when using Mike's templates for tube stripes, right? Just painting it with a brush... Thx for sharing! Saludos. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.