doubledx

PM sent. thank you

oh wow, I'm very proud to hear that. thank you. sure, next time we meet us I will serve the Rancor Hunters a beer (not blue milk)

Name: Björn Dapper Legion ID: TD-82112 https://www.501st.com/members/displaymember.php?userID=28111 Forum Name: doubledx Garrison: German Garrison about the pouches, I will replicate the Door Alley Trooper after the PO status (next stage is Swat) and the Trooper wears only 2 pouches, this is why I don't add the shoulder pouch. here 2 reference pictures Armor details: Boots, Gloves, Neckseal, Pouldron, Pouches E-11 Bapty Blaster Helmet: Backpack: greetings Björn

Hi, Requesting Sandtrooper Access. Thank you https://www.501st.com/members/displaymember.php?userID=28111

hi Stewart, yes you are right. here is a picture and I hope it helps you the outside edge of the box is in line with the outside of the hoses. greetings Björn

looks awesome, great work !

nice but the Pack#2 is wrong here is pack 2 greetings from germany

Hi Marv, I used Rit Dyemore synthetic graphite as instructed and it works perfectly.

Hi Stewart, thank you, I hope I can help a little bit and I'm very interested to see your Backpack. most parts are from RWA (UK) and some are made by myself. If you have some questions then ask. and by the way it is my first backpack and my first time to built a TD greetings from Germany

Thank you Urs, I'm very happy with the result, it was a lot of work to find all these details but I think I found and build it so good as I can greetings

Hi, I'm very happy to announce that I'm done with the backpack #2 just the weathering is missing but I will make it later...... and here we go. . . . . the Back the right side the left side the Greebie on the upper tray' and here the Original after checking the other backpacks. I changed my round plate behind the dish. I bought a 5" rubber backer pad, it was used on the other packs and it makes sense to me, that they use it here again. I check the reference again and I think this backpack has a 2. red support behind the upper tray, but it totally paint black It looks like there is something on the frame, so I added a 2. support stripe to my pack. and the last thing was the hose case. I filled up 2 of the holes and add 2 caps of the other 2 screws. greetings from Germany Björn

hi, back again so here are the test fitting..... and here you can see, the kidney is overlapping around 15mm on each side. please help me, can't walk or lift the legs good enough and I didn't wear my boots. when I wear my boots, the Shins moving up and then I can not move the leg. greetings

here are the pics from the right forearm and bicep greetings Björn

oh yes, sorry. the right forearm and the right bicep are done. pics later this day

ok like this, there is enough space overall thank you Paul for the help

some updates: little update on the Mortaltube, i trimmed the greebie a bit on top and on the bottom you see it here and changed the dish and add the hole you see it here: and my Radio, it was a lot of work and the buttons are 3D printed I must add the silver greebie on top edge and then I'm done with the Radio greetings

good morning, ahhhh ok lets start forearm: and this is now my cutting line the top is around 165mm and the inner around 130 - 132mm I think I understand it. . . . greetings

Hi Guys, I need some help with the armor here my problem: forarm I cut both to 7,5mm for the 15mm cover no trimming on the other side and this is my problem right now, my arm fits perfectly into it, but I think this is not correct. same problem with the bicep it fits very good so can anyone help me please ? greetings

Hi, here s a little update: next was the build from the little pipe on the left. I designed a top greeblie and print it out, after glued on a 32mm pipe, sanding and painting attached to the pack. Next was the greeblie for the Gio Style bottle, here the same, I made a 3d model and print it. Sanding and painting, attached to the bottle and mount the Bottle to the Pack. I sanded the box for the hose and fill some gaps with modelling clay. Sanded all and paint it. Put all parts together and this is what it looks right now. you see I add round piece behind the hose box. see this picture I waiting for the new radish (transparency) and I must add the greebie on the tray. Radio: Trimming the faceplate building the case for the radio filler and sanding and this it how it looks at the moment greetings

good morning everyone, I think I'm done with my Bapty. . . . I hope you like it and it was very cool to build it, a big THANK YOU to Urs and Thomas for there help. greetings from Germany Björn

hey, some more progress . . . . i ordered some samples to find a good alternative to the original, after I received my order, I sewed the red support the syphon was the hardest part for me to get it together, some areas very thin and cracks fast. after I glued all together and later I saw that I glued the thread area wrong together. no problme I cut all of and fire up my 3d printer. next step is to sand the syphon and add paint the original straps after I used Rit Dyemore but I had to change the foam, the old foam was after changing the paint not usable new fitting . . . . . greetings

hi, here are some new pictures . . . . . greetings

Hi Guys, here are my build I started with the Frame, Thanks to Trevor for helping me to get a Karrimor Totem Senior. The Frame was a little bit wiggle and i curved them to the right position, then I started the first testing with the position of the trays. i glued nuts into the bottles, sanded them and paint them, for the upper bottle I cut little holes into the bottle for the screws later. I trimmed the trays and add little service hole and sanded them, add primer and paint. Thank you to Vincent for the alternative bottle, I started to cut out the inner bottle, after that I sanded all, add primer and paint to it. The Radio from Sandie Comms arrived and I build the filter case, but I'm not happy with it, I started to build a new one. the new case I build out of 2mm black ABS is much better I think, same length but I changed the width and high. for the upper right box, I used a ABS-Box with a Tupperware lip, found on Ebay time for a new test (you see the old filter case), I marked the new position of the top bar, bend the frame to the new position and cut the frame, add some holes for the new top bar, add primer and paint. next test assembling that's my current status on this WIP, more pics to come.

hi, a lot of parts arrived. I spend a lot of time on this backpack and here are my impressions. there is a red band support on this pack and the upper seed tray has 3 ribs too (my opinion) you see the big rib on the first picture and maybe a second one on the side view greetings Björn / doubledx TA/TB/TS/DZ - 82112

Hi, this is my first Bapty build and here are my WIP. the Grip (the longest part) the Mag housing Power Cell mod (I used old Vintage resistors) the Pipe mod I add a thin piece of metal to it, and closed the back of it with a plastic pipe first test fitting and details first paint job i need to finish the folding stock and the counter, stay tuned, more is coming.... greetings from Germany Björn / doubledx TA/TB/TS/DZ - 82112