The Sleepy Llama

Thank you. I used a ABS and acetone paste. I didn’t paint it but I did sand and polish it. A lot of sanding. Just finished up a first pass of weathering. More Pics to follow.

My solution to my problem Any thoughts?

My solution to my thigh problem.

Reposting here from my build thread for visibility. Here is a picture of disaster of a thigh. I measured and taped and did it again. I still managed to mess it up, the question is how bad. So the situation is I trimmed for width, then trimmed for length. As I did that I made them too tight. By a decent amount. I opened up the front as much as I could and added a shim which leaves me here. Any thoughts on if this is approvable? Any fixes? My plan is to try to source a replacement set of thighs at some point, but I would like to get this done soon. Thank you for looking Steve

Been a while since I updated this. My Family was impacted by the Camp Fire in Paradise CA. My Mom and Sister lost their home in Magalia and my Grandma was trapped in her home. She has been tentatively identified , but we are still waiting for DNA confirmation. Needless to say I haven't done a lot of 501st related things lately. My Grandma has always been a fan of sci fi and the Star Wars universe. I think she would be proud that I finally finished this project. Anyhoo here is a picture of disaster of a thigh. I measured and taped and did it again. I still managed to mess it up, the question is how bad. So the situation is I trimmed for width, then trimmed for length. As I did that I made them too tight. By a decent amount. I opened up the front as much as I could and added a shim which leaves me here. Any thoughts on if this is approvable? Any fixes? My plan is to try to source a replacement set of thighs at some point, but I would like to get this done soon. Thank you for looking Steve

Getting the final parts done. I've been afraid to start cutting on my thighs, so here goes nothing. Pic of the first test fitting/taping. Thanks for any input. Steve

A few more pics: Really happy with the chest armor. My bucket has the first pass of Burnt Umber on it and will benefit from the second pass of oily black soon. What do you guys think?

Time to resurrect this thread from the mostly dead. Much has changed since my last post. Life sort of got in the way of this build, along with project ADD. So after a move to a new state and ordering a TB armor kit, I decided to get my Sandy done. Much progress has been made and submission to a new GML is in sight. Glad to be back in Mos Eisley and getting dirty again.

Very cool, Kman. I like that bracket set up. Thanks for sharing.

I thought I would start a conversation here about helmet fans. So do you use them? How many, 1 or 2? Kit or DIY? Or just your general thoughts. Please feel free to add a picture of your bucket. Cheers

Yup, that's what I did. I bought the kit from Trooper Bay. I think my elastic is much shorter than those shown in Mr No Stripes instructions.

So yeah, totally didn't fit. I'm guessing I need to lose about two inches. My question is do I remove material from the abdomen or the chest? I feel like trimming the abd is the best move because it is covered by the chest. Think I'll pause on the front and move on to some arms.

I made some progress with my armor today. I started working on the abdomen and chest piece. I'm not entirely happy with the strapping system. It doesn't seem to line up at all and the fit is off. I do like how the abd rivets and snap turned out. Any input on the strapping system? I'm thinking of lengthening the elastic to try to increase the overlap along with repositioning the brackets to line up better.

Thanks for adding this section. I enjoy seeing all the different setups people come up with.

Little panic attack causing there, dutchy! Thanks for bringing that up. I just did a real quick check and they seem to be very close. Especially after some dirtiness is added. Looking forward to the electronics section to see everyone's setups.

My new Bucket arrived today. It's a RS Prop Masters Sandtrooper Commision. I'm very happy with it. Now I need to add some fans, wireless mic , new lenses and a good coat of Plasti Dip.

My package has arrived from the Imperial Armor Factory! Lord Vader demands my immediate action to this task. I am told that there are rumors of a teddy bear invasion of Mos Eisley and new recruits are expected to suit up ASAP! But first a picture: Wish me well.

UPS tells me today is Big Brown Box day! Feels like December 24th as a little kid. Every truck that drives by the house gets my attention. I swear FedEx is doing laps in the neighborhood to torment me. Standby for pictures of boxes and white plastic.

Good news everybody! My armor has shipped, should arrive on Wednesday. I'm excited to get started. Steve

Making progress with what I have on hand. Did some weathering on my Pauldron. And my gloves

I'm a little short for a Stormtrooper, 5'8" and a few inches to big around the belly. Sounds like AM may be the way to go. Thanks for the input.

Ok let's try a couple of pics:

So after you guys talking about the chemical gloves being sweaty, I wore mine around the house. Kinda clammy in there. The Gorilla Grip gloves fit my hands so much better, no odd lumps and folds. I think I'll follow the lead of having both available. I'll add another set of latex hand guards to my next order. Kirk, I have not yet ordered my armor. I have narrowed it down to a WTF Kit or an AM kit. I was very close to going with a RS Props kit, but decided to go with a less expensive option. I hope to order within the next week or two. Come on IRS pay up! In other news, I "finished" my Rubies E11 blaster. I think it turned out pretty decent. Pics to follow.

After some research and rewatching ANH I've decided to join the DIRTY SIDE. I've been happily shopping away, and boxes are showing up and account balances are going down. So far I purchased my Helmet from RS Props, a shoulder pauldrin and hand guards from Trooper Bay, a few pouches from here on MEPD and a neck seal from a FISD member. Pretty addictive stuff, I'm already thinking of the next project. The question I have is which gloves should I glue my hand guards to? I have a pair of the screen accurate chemical gloves and a pair of the Gorilla Grip gloves. My thinking is that I'll use the Gorilla Gloves for my basic submission, then the chemical gloves for Police Officer deployment. More to come. Steve

I bought the app a little while ago. Works great for me and I really like the TD chatter.