Frame question

[Juliusthegreat]

I have a question about the frame used for the backpack. It´s suppose to be a 1/2" pipe (the yellow one) and if I convert that into milimeter then it´s 1.27mm and here in Sweden (and maybe most of europe) we only have 16 mm and 20 mm pipes. The 16 mm pipe is that size on the outside and the inner measurement is (the hole) 13 mm.

I hope someone can confirm that 16 mm is almost the same as the 1/2" and is the one to use.

[pandatrooper]

Hi Jimmy. I just measured some 1/2 inch pvc pipe here, and the outer diameter is about 22mm. In north america, the 1/2" dimension is the inner diameter.

Hope that helps!

[Juliusthegreat]

Hi Jimmy. I just measured some 1/2 inch pvc pipe here, and the outer diameter is about 22mm. In north america, the 1/2" dimension is the inner diameter.

Hope that helps!

That helps alot. I know now I bought the wrong one and need to get the 20mm ones instead. One other problem is the 90 degree angle that´s used in North America (maybe other countries also) can´t be found here . The ones here are not a straight 90 angle but more bent so wires don´t get caught in there.

Well thank you very much

[pandatrooper]

Not sure if you're ordering other pack parts from Crashmann, but I think he sells a PVC kit for the frame too.

[DirtyBoy]

frames are pretty easy with the right parts. if you need them, let me know and i will ship them out to you

[Skodatrooper]

B and Q (DIY.Com ) will probably be able to send you some 90 degree parts, or the great auction site in the sky... (fleabay)..

Nick

[Juliusthegreat]

Thanks for trying to help me. Since I am lucky and have TD brothers all around the world and even in America I have got helped get the right pipes and 90 degree parts.