Mr BoJangles Posted April 9, 2010 Share Posted April 9, 2010 And heres a picture of what I used for my sling mount. It's one of my ends from my backpack straps. I put a bolt through it with some washers, held in place with E6000. Tim http://i187.photobucket.com/albums/x144/trixie05_2007/slingmount.jpg I do have an HF T-21 too. This is the only issue I have. I don't know how to put the sling mount. So by doing what you did.......can you hang your T-21 by the sling? Is the sling mount strong enough? Please let us know. Quote Link to comment Share on other sites More sharing options...
godzilla Posted April 13, 2010 Author Share Posted April 13, 2010 Yes it is strong enough. If you use like a 2 inch plus bolt it's solid. Tim I do have an HF T-21 too. This is the only issue I have. I don't know how to put the sling mount. So by doing what you did.......can you hang your T-21 by the sling? Is the sling mount strong enough? Please let us know. Quote Link to comment Share on other sites More sharing options...
Boklast Posted April 26, 2010 Share Posted April 26, 2010 Awesome work! I guess I'm in the "need to add to my HF" group! I keep chickening out of adding the sling mount though.... Quote Link to comment Share on other sites More sharing options...
MiDri Posted July 18, 2011 Share Posted July 18, 2011 Ok, Heres some more detailed pix of my T21 including descriptions of my build. Tim Heres looking at the bottom of the gun showing the drain pipe. The drain pipe does not make it around the diameter of the gun, so you'll have a gap. http://i187.photobucket.com/albums/x144/trixie05_2007/Ribbing2.jpg I use a piece of sheet styrene for the thing in front of the ribbing. I think it's 2" wide and long enough to wrap around the barrel. You can see in this photo that I slid about 1/4" of it under the drain pipe. I then took 1/4" wide strip styrene to do the lips on the end and up against the drain pipe. http://i187.photobucket.com/albums/x144/trixie05_2007/ribbing6.jpg The wire is copper ground wire from Home depot. I drilled for the screws and coated them with E6000. http://i187.photobucket.com/albums/x144/trixie05_2007/Ribbing7.jpg To hold the wire down where it pushes up against the sling I slipped one of the pieces from my snaps over a screw. http://i187.photobucket.com/albums/x144/trixie05_2007/Ribbing3.jpg http://i187.photobucket.com/albums/x144/trixie05_2007/Ribbing4.jpg http://i187.photobucket.com/albums/x144/trixie05_2007/Ribbing1.jpg You devil you, this is exactly what I needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.