tk-d Posted November 13, 2006 Share Posted November 13, 2006 I've had a go this weekend at doing my AP armour and started with the helmet . So after hacking away for two day i'm almost there. Just need some help with fixing lense in. I'll be getting a welders mask amd cutting it down. So any advice on fixing the lenses in would be a help Quote Link to comment Share on other sites More sharing options...
freakengine Posted November 13, 2006 Share Posted November 13, 2006 I just held mine in place and hot glued around the sides and bottoms. I left the tops open for a little more ventilation. Here's a coupla pics: Quote Link to comment Share on other sites More sharing options...
TK-459 Posted November 14, 2006 Share Posted November 14, 2006 I used a solid strip that attaches at the existing bolts at the ear. Its great for ventilation but can fold in with high winds. Quote Link to comment Share on other sites More sharing options...
tk7602 Posted November 14, 2006 Share Posted November 14, 2006 i used a piece of welding shield cut into a single "uni-lens". it's attached in the center and the 2 far corners: it's hot-glued in, with tape in the center just in case the glue pops out on me. i left gaps all around the edges to help reduce fogging. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.