TD-4242
-
Posts
192 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Posts posted by TD-4242
-
-
I haven't had a reply from helmet head in 48 hrs so the 2nd Lewis is up for grabs. First to pm or email me takes it. wwarner42@cox.net
-
This was the custom part that I made and pulled on my vac table to resemble that piece
-
were they all this item. The one on the far left in this picture doesn't look anything like that. It has more of a rounded 5 point star shape.
-
I'll probably be making them as long as they sell. Even when it drys up I'll try to keep one or two around in case someone wants one.
-
gotcha as #2
Everyone else will be on the list for the second run that should start getting some done about 2 weeks after this first run goes out.
-Bill
-
I'll put you at #3 for now. It'll be about 3-4 weeks before I get the next set done anyway.
-Bill
-
All right, I started the list on the bottom of the first post in this thread.
-
Well, I have confermation that I'll be getting the last part of the first two lewis guns on Monday. This is just to foam the recievers so they wont be bendable.
I'm going to open it up for everyone that is interested. I'll be selling these first two, then I'll be making 10 more. One will be fore me but I'll have 9 others for sale. I'll edit the first post in this thread and add a list of people, in order of who contacts me of people ready to buy one. When I get them done I'll contact you by either pm or email and you/ll have 48 hours to respond and make payment arrangements, or you get bumped and the next person gets an email.
Please reply to this with interest and you'll be put in order after this post.
Price is $275 shipped in the US only. It will be in a kit form and will include glue.
Thanks,
-Bill
-
Ok, here are photos as promised. I'll probably work these into some type of assembly instructions to ship with the guns. As you can see the black is very dark. The only part that will need painting is the PVC section + general weathering of course.
All Parts layed out
First part. The receiver
Attached ribbed section of barrel
Should paint first, but this is the PVC section of barrel
The but stock is put on
then the business end of the barrel
The top of the receiver
This is how the site attaches
This is the small half circle section (not sure what it is or called)
All the parts in the photos were only set in place. They almost hold them selves together, but still will need glue to hold strongly. the reciever to the ribbed barrel section holds strong enough that you don't have to glue it. This allows it to be broken down into the two halves seen in earlier photos.
-
Man, I must say I love that second picture. You guys look exactly like action figures. If someone said that was the new sandtrooper 4 pack I'd belive them.
Awesome!!
Oh, and I'm really pleased you are happy with the prototype. I just (as of about 5 minutes ago) pulled the first reciever out of the mold. I also just noticed I am out of ridged foam. I'm going to cast up the second one and order some more foam. As soon as the foam comes in these first two will be up for sale.
Pictures soon.
-Bill
-
got the rubber in today and have poured half the mold. The other half should be ready to pour in about an hour and a half.
3 hours after that I'll be ready to make some complete lewis gun kits.
Stay tuned for my review of how they turn out. I really can't wait!!
-
I wasn't the camera man so I am bugging the rest of the garrison to get us the pictures.
Soon I hope. Unfortantly my Sandtrooper didn't make it. The person that was going to borrow it wouldn't fit in it so it got left behind. I was in my ARC trooper and my clean trooper and shocktrooper made it on some of our local Fan Force guys.
-
Just a quick update. These guys are comming along nicely. I think the only section that will need to be painted black will be the pvc pipe section as they only have white in the size that I need. The rest of the black is a very dark, even almost gun blued looking black. A bit of weathering and this thing should be perfect.
Here are the parts that are done and ready to go. Two sets minus the reciever section:
Here is the unfinished mold that I have RTV on order to smooth on for. It is sceduled to be delivered on Thursday. You can see some of the reciever still poking through not quite covered:
-
I'd say it'd work. Probably one of the best hardware kits I've seen. Painted up and everything it'd look really pretty good.
-Bill
-
where is this site? I'd really like to see it. Is it big enough? Most toys of a gun the size of the lewis would end up being about 1/3 to 1/2 the right size.
-Bill
-
Email got and you were fastest.
-
Well, for one thing the barrel is backwards. The ribbed section goes next to the reciever. That looks like it was out of the same molds as the one I'm doing. If you need repair parts let me know.
As far as stripping paint off resin I have found brake fluid to be the best if a little messy. Just soak it in brake fluid and the paint will peel off. Then clean the parts really really good with soap and water.
Hope this helps some.
-Bill
-
Yes, but I do have one ready except for the part that I need to mold. Saturday I'll get the other one ready except that same part.
Once I finish the new mold then it'll only be a matter casting the new mold twice and I'll have two. I ordered the stuff two days ago but it hasn't shipped yet. It should be here fairly quickly.
Would anyone be interested in the proto-type for $225? If so first to Email me gets dibs wwarner42@cox.net I'll Take detailed photos and make sure to point out all the things that I am going to fix with the production ones so you know what your getting, but I am just not going to be able to afford to keep one yet.
-Bill
-
Well, I came up a bit short on RTV last night so I had to order another gallon kit from smoothon. At $130 a gallon this stuff isn't cheap, and makes gas prices look like a drop in the bucket, but atleast I'll have some extra to redo any of the other smaller parts that may give me grief.
-
They will require some assembly. I am going to try to tint the resin enough so they don't need to be painted. All the parts I did today came out looking great. I will most likly include the plasti-weld that I have found to be the best for assembling these.
The only part that will require painting is the aproxamatly 10" of PVC pipe that covers from the ribbed section of the barrel to the tapper tords the end.
The assemlby will be amature to beginner work as all the parts seem to fit really well and should take no more than 2 hours.
Weathing will be to your own taste and I don't have a leather strap yet.
-Bill
-
Ohh yes, That is still going to be how it will be put together. I am just cutting it from 7 parts to 6. The receiver will be 3 parts and the barrel will be 3 parts.
-
The first run I think will be $275, shipped in the cont. 48 US and $300 shipped elsewhere.
-
Just an update. I am creating a new mold for part of it as while casting the prototype I tore a portion of the mold. I also wanted to have the reciever and vent sections as one pice rather than two pices for strenth. I should have matrials to start on these tomorrow. I'll still have to finish up this mold but may have one or two ready for sell by the weekend.
-Bill
-
You know TD-0013 has got your @$$ covered.
Radar Dish
in Field Backpack
Posted
Are these the same ones with the button on time like this?
http://cgi.ebay.com/Vintage-Tupperware- ... 6249195974