talizman

New trays on order from RWA Helmet modifications as requested by Felix.... 13 tube stripes on left side Tube stripe made closer together on right side Photo showing paint spots and large paint run on rear Hopefully these mods tick the boxes for the helmet I'll crack on with the pack

Transparent radar dish came today

hi Felix okay, to address your points -: HELMET I will adjust the tube stripes on right as requested I will remove two of the stripes on the left I'll get you a better picture of the spots on the rear. They are there! :-D BACK PACK I'm totally redoing my pack. I've ordered a Karrimore frame, a raw cast accurate syphon and a brexton box for the toolbox. When the parts arrive I'll adapt the frame and fit all my components to it

Btw, the original positioning of the height of the mortar tube was because I copied the CRL image

Lab pipe added Felix

Okay so I've been working away at the requested modifications by Felix... I've copied the screen used lid exactly I've removed the weathering between the eyes I've re-done the weathering under the eyes I've added the marks above the vocoder and on the left mic tip I've added the weathering on the right ear I've adjusted the left eye I've added the large paint run on rear of lid ive added the two small paint drop runs on rear I've modified the pack as follows-: asjusted mortar tube and lowered it so it's level with top of pack adjusted TD panel towards front weathered edges of tool box moved radio and syphon up 1.5" I have a replacement radar dish on order I'll make the lab pipe next I've adjusted the height and angle of shoulder pouch I re-did the coffee stain on the pauldron I removed some weathering from boots Left - after Right - before Both boots weathering fixed Right shoulder mark added right forearm weathering fixed Weathering on right shoulder fixed Decal removed from left shoulder Left bicep spot added Knee ammo pack is curved on bottom corner and square on top corner To do -: finish pack modifications - lab pipe and radar dish fix weathering on ab and chest add disc to DLT19 handle and weather weapon Hope this is all okay Felix? Thanks buddy

By the way Felix... regards my pack... I didn't think the move along pack had a lab pipe... isn't it the Alley Check Captain pack that has the lab pipe?

Thanks Felix, the reference images are a big help. I'll get onto those modifications asap!

Hi Felix Thanks for the initial feedback. If you could provide photos of the relevant parts, to show me exactly how you would like mine to look, that would be a big help. I'll remove the decal from shoulder can you advise what is wrong with my coffee spot please? I'll remove the Velcro from the chest thighs - what position should they be in? Shoulder pouch - is the position wrong? Weathering on chest, shoulders, biceps, abdomen and boots - I'll adjust the weathering once reference pics are available. Due to photobucket making all the photos on the forum disappear, I had no reference pics to go by Many thanks for the feedback meantime

Outermost teeth have been backed and filled. Once hardened I'll give them a coat of paint

I'm assuming that because UKSWRATH got SWAT clearance that his and indeed my chest weathering will be acceptable? I'll fill and paint the outer teeth

Thanks. It was built by my Garrison mate, SWAT officer #004

Hmmmm I checked the most recently deployed Cantina Captain's and I used UKSWRATH's chest weathering as reference... here is a side by side of he and I... I thought it looked pretty darn close

Okay, I've been studying reference pictures and adapting my bucket and armour to match the screen used. I've added the paint runs, repaired cracks, extended frown point, and adjusted weathering. Hopefully I've ticked the required boxes... Anyway, onto the photos... front face showing accurate paint runs extended grey paint to point on right side of frown paint run over right temple repaired "crack" on tight tube large paint run on left tube strapping system visible back side of male popper on right side of ab plate Armour front (black Velcro tab to hold mp40 pouch in place) the sticker on left shoulder bell is my UK Garrison branding to show I'm a cleared 501st member in the U.K. Fully kitted up With DLT19 Weapon Pack

Comparison with screen cap

Im in the process of emulating the weathering however the loss of the library images from the forum due to Photobucket has held me up how is the chest armour looking so far?

Cheers bud, I've got my pic hosting situation sorted. I just need access to the reference photos that were posted in the SWAT section before Photobucket disabled them all...

Like many other members, I'm currently a victim of the Photobucket saga whereby all my images are not useable without paying their silly costs. I'm in the process of sorting my photos out so I've started this thread as a placeholder. I have a slight problem in that the reference images of the Cantina Captain have also vanished (thanks Photobucket) Are there any plans to host the images elsewhere and re post them so that I can sort my weathering out? Thanks John

Name : John Reilly Legion ID# : TD 21804 Forum name : Talizman Garrison : UK Garrison Trooper emulated : Cantina Captain Currently deployed as MEPD Police Officer : Yes Weathering appropriate to screen used armour : Yes Pack, pauldron and weapon combination matches specific trooper seen on screen : Yes

John Reilly TD 21804 johnreilly77@hotmail.com thanks

Requesting 501st MEPD 501st section access and MEPD Sandtrooper section access. John Reilly TD21804 https://www.501st.com/members/displaymemberdetails.php?userID=16899

Awesome news. Thanks Felice! I'll send a pic right now. Thanks again John

Here's my post from earlier with my pics uploaded on a new host... Ok, here we go... I've made the requested modifications... hope they're okay screws added to underside of chest armour Pouches weathering Weathered pauldron Raised brow Comparison before and after brow adjustment hopefully these adjustments are good enough for clearance. Looking forward to your reply

Great!? photobucket are being idiots... they want $399 a year to host images?!?!

Because it's just been painted it is kinda dark... I can tone it down if necessary