-
Posts
25 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Posts posted by RICKY
-
-
Trooper1 thank you very much, i think need some expert to take over the project, I have the file in corel unglued as well as my photo of sandtroopers, the concept is basic but if any one can improve it would be excellent, and thanks also to 3677 by the way great blog, just had another design but with 3 ATAT but I liked the most this.
add a photo in case some designer really wants to redo the design
thank you very much
-
Brothers, I have a prototype for shirts, but in my city is a bit expensive production and quality of the shirts I think is very low, so if anyone is interested in jumping in and take over the production, go ahead, here I leave the design, and accept suggestions for design changes
By rickyzeger at 2012-03-27
-
THX TO ALL BRO'S
i'm on vactions now ¡¡¡
-
Tacos and XX Beer for everyone in the Cantina! Congrats on your Deployment!!!
Jajajajajajajaja Sandman Tigui I see there, I pay, is a night of partying. and happy Christmas to all and their families. receive a big hug
-
wowwww realy tanks to everyone to follow this post and for the correct guide to make an new Mos Easley officer. There is now a new partner covering the backs of others. is a great gift for me for Christmas, by the way Merry Christmas to all here in Mos Easley. a big hug to all and now find those droids.
-
Jajajajajajajaja THX Bluey.
-
-
By rickyzeger at 2011-12-14[/img] By rickyzeger at 2011-12-14[/img] By rickyzeger at 2011-12-14[/img] By rickyzeger at 2011-12-14[/img]
Hi all again, back with corrections which are a new skin orange Pauldron and close the sides of the plate ab, the parts were cut from a spare low back, dremel cut and pasted the wing lower back. I am aware you have comments, receive all a big hug and thank you for following my post and the great support from you all.
excellent the new face of the detachment
-
Cool to see you almost done bro!
Three things remain...
You must paint black the whole exhaust port on your pack.
There is one white thingy on the pipe...
And, you need to close the side gaps between the ab and kidney plates as in the CRL for 501st clarence:
13.Kidney Plate: Kidney plate sides should line up with the ab plate leaving no gaps, just a seam line. The top of the kidney plate should abut the bottom of the back plate.
Of course, a small gap (as much as 1/2 an inch) could be allowed.
And, please post close up pictures of your hovis to see the details and screen mesh. I know you have it since I have seen your helmet in person. But to follow the proper process, I will need you to post them here.
Just that and you will be done, with the white Pualdron.
Unfortunately, the stitches on the orange and black ones make them unacceptable for Police Officer or SWAT Team.
But no worries, the white is fine!
Let me know if you need anything...
Someone helpme ¡¡¡
I have no idea how to fix the plate ab of the kidneys, someone can guide me
thank you very much everyone for being always on the lookout.
(Juan will send an mp)
-
Felicidades Hermano ¡¡¡¡¡¡
Lo lograste, yo no tuve la misma suerte, pero regresare el año que viene a ver como me va, al cabo que lo mugroso lo traemos en la sangre jajajajajaja.
a ver cuando lo celebramos y aqui te tengo tu regalo. un abrazo y estamos en contacto.
-
It is probable that the problem of separation of costs is caused by excess of jawa juice, but in that heat of **** is hard not to take. I measure 1.75 and weight 90 kg, 15 kg of excess weight I have, thanks infernu brother, I hope to see you soon.
a hug to all ¡¡¡
-
Very nice! For future reference. The Orange and Black Pauldrons dont have the sew lines in the main sectors. Just the white.
Just an observation.
See you in the sandpit soon I am sure.
Bros:
thanks for the observation of pauldrom, unfortunately I knew it too late. and so good that you liked the photos, is in an area of beach and dunes in Tampico, and is at your service, I have many more than at some point I'll post. a hug to all and hope to be soon in the detachment.
By rickyzeger at 2011-08-29
By rickyzeger at 2011-11-07
By rickyzeger at 2011-11-07
-
Hi brothers, I'm back with new images and more detailed, so I am at their orders and ready to have my armor as mandated by the emperor.
a hug and look forward to new directions
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-10-02
By rickyzeger at 2011-11-06
By rickyzeger at 2011-10-02
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Tanks ¡¡¡¡¡¡¡¡¡
-
Cool man....what's the source on this photo and do you have the full size?
Hi dirty boy, yes I have the full picture, you can see here. http://profile.imageshack.us/user/rickyzeger/
I'm almost done the details of my armor, I check it with John (ico) and return to posting new photos.
tanks ¡¡¡
-
-
Hi Ricardo, first off welcome to the MEPD. I see a lot of action poses here in this thread but for deployment application, you may want to refer to Juan, our Deployment Officer's sticky post right here in this sub forum for what kind of photos are needed so it will help us evaluate your application much easier.
Lastly, you will also need you GML to approve your TD first as well.
Good luck!
Copy that ¡¡¡ today finish my screen acurate backpack and take a lot of picks ¡¡¡
-
Name: Ricardo Zeger
501st TD ID: 7457
MEPD Forum Name: Zeger
GARRISON: Mexican, Garrison
By rickyzeger at 2011-08-08
By rickyzeger at 2011-08-08
By rickyzeger at 2011-08-08
By rickyzeger at 2011-08-08
By rickyzeger at 2011-08-08
-
There are several members here who sell most everything you need...im sure they will chime in but check with Quartermaster and DirtyBoy for starters
Tanks 4 the info.
Nice armor ¡¡¡¡
-
I gotcha covered if you need bro....let me know what pack and we can go from there
bro need this parts:
Seedtrays (4)
-Bee stinger
-Radio
-Control from mortero
-Radar dish
-Syphon
-mushroom cups
my adress:
C.P 89367
Tampico, Tam. Mexico
Tanks ¡¡¡¡¡¡
-
HELLO TO ALL,
I AM TK-7457 FROM THE MEXICAN GARRISON, NEED FIND A SUPPLIER TO BUY PARTS FOR MY SANDTROOPER BACKPACK SCREEN ACURATE , AS IT IS ALMOST IMPOSSIBLE TO FIND MOST OF THE PARTS ARE GRATEFUL FOR THE HELP.
TANKS ¡¡¡
*ACTIVATED* TD-5423 / DAVEMARS / SWAT OFFICER # 014
in MEPD S.W.A.T. Program
Posted
wowww Awesome brou ¡¡¡