Felice Posted September 5, 2016 Share Posted September 5, 2016 Hi Lee Thank you for your interest in joining the elite and submitting your request for SWAT OFFICER activation. Your gear is on spot and like Strider said: it is nice to see a not so common trooper! The MEPD Senior Commanders and myself will give your armor a full inspection and review. Some details may definitely be missed and re-checked, but we will try to catch them on every pass given until you are cleared and ready to join the Special Weapons & Tactics Team, brother! So don't waste any time Felix:-) (yes it's me)..... MEPD SWAT OFFICER: application review part 1 Name: Lee Moore Legion ID#: 81913 Forum Name: Moley77 Garrison: UK Garrison ANH Sandtrooper selected: Alley Door Check Private V2 pack Helmet: Green lenses: check Paint color on traps / tears: check Paint color and number of teeth: check Mic Tips: stand by Vocoder color: check Rank bar: check Brow: check Side Screws (ears): check Weathering: stand by **Additional Comments** Ok Lee. I just have to find some more references. You are totally right with your comments at the beginning in your introduction: you emulate this specific trooper. But for my conscience I have to check These specific things. Side note: your weathering is really authentic and on spot! But I fear that we have to go into some discussions. **Result on Helmet** Stand By Armor / Suit Details: Stand By Canvas straps shoulder: Neck Seal: Black Undersuit: Shoulder Bells: Biceps: Forearms: Pauldron: Chest / Back Plate: Kidney / Butt plate: Ab plate / Side Rivets / Cod: Strapping: Tighs: Shins / Calves: Sniper Plate: Boots: Gloves: Hand plates / Guards: Ammo Belt (waist) w/ correct angled edge: Ammo Belt (right knee): Canvas Belt: Pouches: Weathering: Crotch Snaps: **Additional Comments** **Result on Armor** BACKPACK Stand By Details: Weathering: **Additional Comments** **Result on backpack** WEAPON: E-11 Tunisia Blaster Details: check Weathering: check **Additional Comments** Nice looking Bapty:) **Result on Weapon** CHECKED & CLEARED Ok Lee, this Review will be my hardest one. Your trooper is really really nice. But I will do an excellent Job and in the best case to improve your armor (probably just a Little bit)- and that will need some time:-/ Please stand by bro...... Cheers, Felix Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 6, 2016 Author Share Posted September 6, 2016 Thank you.....standing by. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 6, 2016 Author Share Posted September 6, 2016 Do you require some more detailed pictures of the weathering on the helmet felix? Quote Link to comment Share on other sites More sharing options...
Felice Posted September 7, 2016 Share Posted September 7, 2016 Probably for the back. Just let me check some references... Quote Link to comment Share on other sites More sharing options...
Felice Posted September 7, 2016 Share Posted September 7, 2016 HI Lee, I will manage your application something different to other SWAT applications. At the Moment I have a heavy loaded Desktop in the Office AND your application, or better: the references, are really tough to identify (but that's why I love this trooper and I love competitions:-) ) So I will begin with the helmet (the blaster is finished). Is this way ok for you? MEPD SWAT OFFICER: application review part 2.0 bucket Name: Lee Moore Legion ID#: 81913 Forum Name: Moley77 Garrison: UK Garrison ANH Sandtrooper selected: Alley Door Check Private V2 pack Helmet: Green lenses: check Paint color on traps / tears: check Paint color and number of teeth: check Mic Tips: see comments Vocoder color: check Rank bar: check Brow: check Side Screws (ears): check Weathering: see comments **Additional Comments** I am not sure with the mesh of the mic tips because I never saw this kind of finely webbed mesh. If I compare the meshes of all references from starwarshelmets they more look like a little bit rougher. If you can Show me your Kind of mesh in a reference Picture I am fine. Otherwise you have to Change the mesh please. I will now Show you a Picture of the back of the helmet and I tried to mark the spot which I am missing on yours: This spot is not a chipping spot like the rest. For me it is some Kind of dirt. Please try to replicate it. **Result on Helmet** PENDING Alright dude! I really hope that we will have some fun on this application and in this review. For me it is a really good reference and you are on the right way to become a MEPD SWAT memeber....but not doing the second step before the first:-) Thank you and Cheers, Felix Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 7, 2016 Author Share Posted September 7, 2016 Hi felix. Thanks for the reply. With regard to the weathering marks are you talking about the chip being more of a dirt Mark or that there is additional dirt above the chip? Which I can add no probs. This is the closer detail pic I used which shows a chip. With regard to the mic tips. Can you provide a little more clarity or an example of the 'rougher' look please. Many thanks. Lee. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 7, 2016 Author Share Posted September 7, 2016 I've done some research on the mic mesh. I will replace it. Stand by Quote Link to comment Share on other sites More sharing options...
Felice Posted September 8, 2016 Share Posted September 8, 2016 For me it is additional dirt above the chip Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 8, 2016 Author Share Posted September 8, 2016 Received mate. Will do Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 8, 2016 Author Share Posted September 8, 2016 I see what you now mean about the Mesh. My tip Mesh weave has smaller cross section gaps so I need a Mesh which has larger gaps in the weave. These where the origonal tips that received with the helmet when I purchased it. I will source the correct mesh. Quote Link to comment Share on other sites More sharing options...
TD42115 Posted September 8, 2016 Share Posted September 8, 2016 7 minutes ago, Moley77 said: I see what you now mean about the Mesh. My tip Mesh weave has smaller cross section gaps so I need a Mesh which has larger gaps in the weave. These where the origonal tips that received with the helmet when I purchased it. I will source the correct mesh. Almost there brother.. From what i remember the mesh in the mics on some, not all buckets was a tight screen door mesh, some was a lighter (more space) screen door mesh. 90% were a stainless as well... Im sure another veteran member will speak up about the correct mesh.. here is a pic of mine... Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 9, 2016 Author Share Posted September 9, 2016 That's great mate. Thanks for the pic. Big help. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 10, 2016 Author Share Posted September 10, 2016 I have added the additional weathering patch as requested. The tips will be added on Monday. Cheers felix Quote Link to comment Share on other sites More sharing options...
Felice Posted September 12, 2016 Share Posted September 12, 2016 Looking great dude! Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 12, 2016 Author Share Posted September 12, 2016 Both mic tips have been changed. Hope this mesh is now the correct one. I'll fit both tips tomorrow an submit the final helmet pic for clearance. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 13, 2016 Author Share Posted September 13, 2016 Both mic tips now installed. Cheers felix. Quote Link to comment Share on other sites More sharing options...
TD42115 Posted September 13, 2016 Share Posted September 13, 2016 Much better, mics look great.. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 13, 2016 Author Share Posted September 13, 2016 Appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
Rolf Posted September 13, 2016 Share Posted September 13, 2016 Nice looking sandy Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 13, 2016 Author Share Posted September 13, 2016 Kind words Rolf. Thank you Quote Link to comment Share on other sites More sharing options...
SCRIBBLER Posted September 14, 2016 Share Posted September 14, 2016 Outstanding detailing, weathering and overall work. Good luck on your activation, Troop! Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 14, 2016 Author Share Posted September 14, 2016 Thank you guys. Appreciated. Quote Link to comment Share on other sites More sharing options...
Felice Posted September 14, 2016 Share Posted September 14, 2016 Hi Lee, looking great Lee! Thank you Let us begin... MEPD SWAT OFFICER: application review part 3 Name: Lee Moore Legion ID#: 81913 Forum Name: Moley77 Garrison: UK Garrison ANH Sandtrooper selected: Alley Door Check Private V2 pack Helmet: Green lenses: check Paint color on traps / tears: check Paint color and number of teeth: check Mic Tips: check Vocoder color: check Rank bar: check Brow: check Side Screws (ears): check Weathering: check **Additional Comments** **Result on Helmet** CHECKED & CLEARED Armor / Suit Details: Canvas straps shoulder: check Neck Seal: see comments Black Undersuit: check Shoulder Bells: see comments Biceps: check Forearms: check Pauldron: check Chest / Back Plate: check Kidney / Butt plate: check Ab plate / Side Rivets / Cod: check Strapping: check Tighs: check Shins / Calves: check Sniper Plate: check Boots: check Gloves: check Hand plates / Guards: check Ammo Belt (waist) w/ correct angled edge: check Ammo Belt (right knee): check Canvas Belt: check Pouches: check Weathering: stand by Crotch Snaps: check **Additional Comments** Probably I missed it but I have to see your neck seal. I see a White spot on your left shoulder bell very clear on the following Picture. Is it a tape or missing weathering? **Result on Armor** PENDING BACKPACK Details: see comments Weathering: check **Additional Comments** The gap between the TD Panel and the upper Cup is a little bit bigger in the reference as yours-please try to change it. I marked on your pack the lower trays. I see a black line or something similar but I can't find it in the reference-please help me out:-) **Result on backpack** PENDING WEAPON: E-11 Tunisia Blaster Details: check Weathering: check **Additional Comments** Nice looking Bapty:) **Result on Weapon** CHECKED & CLEARED I think you are near the end of the tunnel. Just these changes and my weathering check and the SWAT penal can do their Job:-) Thanks so far dude and Cheers, Felix Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 14, 2016 Author Share Posted September 14, 2016 Cheers felix. The mark on the seed tray is actually the pack strapping which as become stuck and ended up sticking out. Apologies. The white patch is tape. Covering my ukg decal. I will.drop the panel this evening and post a pic. Quote Link to comment Share on other sites More sharing options...
Moley77 Posted September 14, 2016 Author Share Posted September 14, 2016 Neck seal. Apologies. I forgot to post this pic. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.