Jump to content

Striders Backpack build with found parts


Strider
 Share

Recommended Posts

It's just a bit over a year that has passed since my last pack build but boy, this year has seen quite a bit of new discoveries. I felt it is time to build a new pack, the move along this time, and to try to incorporate those new discoveries. So let's do it :)

First thing for me was the backpack frame. Now we all now it's "The" vintage Karrimor frame. But is there really just one model? I was lucky enough to come across an old boyscout from the UK who happended to have a nice collection of frames up in his attic so I persuaded him to sell his "collection" to me.

back1.jpg

 

I found that they did not only come in different lenghts but also with different thickness of the bars. After some eyeballing and photoshop scaling I found that 0,76 inches (diameter of the bar) looked right:

back2.jpg

 

Again, after doing some measuring I found that the pack should actually be a little shorter than the ones build during the last year. My last pack had a lenght of about 60cm but 45cm looks more like it.

The next challenge was to find appropriate seed trays. After spending quite a bit of time on ebay I actually found them; real vintage seed trays that not even look like the ones used for the original packs but also have the correct dimensions. They only had the 3 rib ones but afaik the only pack that actually comes with a bottom seed tray that has 5 ribs is the move along pack.

 

back3.jpg

 

But since I planned to do the move along pack, some modding was in order:

back4.jpg

The upper seed trays are no finished yet (still need to fill the holes) but this is what they currently look like:

back5.jpg

For the radio I was not lucky enough to snag one on ebay so I decided to model one with the correct dims and details with a help of fellow Sandie (Thanks, Redbeard!). The radio holders on the side are actually cast from originals :) Below you can see a comparison shot with a found radio:

radiocomp.jpg

 

Some other original parts I will use are the Shires syphon, a Gio Style canteen flask and the 4" tupperware lid.

back6.jpg

 

IMO the (wet wipe) bottles have a larger diameter than the ones frequently used. By my estimate they should be in the 9,5-10cm range. I'm using a 1,5L shampoo bottle. The lenght will definitively need to be reduced but I'll do that when I had the chance to do some test fitting together with the other parts.

back7.jpg

back8.jpg

 

However, since none of the mushroom caps currently offered are wide enough, I asked Redbeard again to help me model and print it in 3D which I usedd as a base for my mold.

back9.jpg

EDIT: During my build I discovered that they've indeed used a rubber plunger for the "mushroom cap" (link provided in the thread).

I vac formed them in black ABS (along with the exhaust port):

back10.jpg

 

That's all for the moment, hope you guys like it so far :)

 

 

 

 

  • Upvote 1
Link to comment
Share on other sites

18 hours ago, Strider said:

Thx, bro. Well, I think I might do an interest thread on all the parts I'm making for my pack and if demand is high enough I would do a run on those parts. But first I have to find the time to finish it :)

 

I am really looking forward to the finished pack bro! ...and demand should be high, aren't we all accuracy geeks ;)

:salute:

Link to comment
Share on other sites

  • 2 months later...
9 hours ago, RoCKo said:

Updates? Can't wait to see this finished! 

Thanks, bro. Updates coming up soon! I've managed to find an original 'tool box' and 'mushroom caps' and will reveal what they actually are. (Yes, I do like to tease, lol ;-)

Link to comment
Share on other sites

11 hours ago, Strider said:

Thanks, bro. Updates coming up soon! I've managed to find an original 'tool box' and 'mushroom caps' and will reveal what they actually are. (Yes, I do like to tease, lol ;-)

 

ohhh interesting...  :yes: i do wanna upgrade my toolbox as well.. 

Link to comment
Share on other sites

Oh man, keep it in the MEPD community first of these are not so commonly available so we can have 'first dibs' on the parts!

Can't wait...       again!                    :thumbsup: :dance: :thumbsup:

Link to comment
Share on other sites

19 hours ago, Strider said:

Thanks, bro. Updates coming up soon! I've managed to find an original 'tool box' and 'mushroom caps' and will reveal what they actually are. (Yes, I do like to tease, lol ;-)

Dying to know !!!! Painfully waiting to hear this!!!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...