Jump to content

Whats the best/most accurate E-11 out there...


Rolf
 Share

Recommended Posts

I would have to say that there are subtle differences if you all look closely at the blasters offered in

photos on this thread.

I'll give my opinions about the elements that I see on each blaster where I see the problem:

hyperfirm:

number one I'd have to say that the hyperfirm has several problems with it-

the magazine is far too cut down.

the sight rail front and rear are incorrect.

the seam that runs all along the body of the blaster should not be there.

the D ring and hengstler could be much better.

T Tracks are totally wrong!

the blastech armory version:

the sight rail is too short at the front and rear.

the end cap is wrong, it's a nice cap, but it's shaped too round.

the folding stock arm is not shaped correctly the bend at the meeting point should curve.

the front sight block is incorrect.

I would have to see a closer look at the trigger and grips to make an opinion about it.

the SDS blaster:

the clip is too short.

the hengstler is wrong kind, and is mounted too far out.

the overall shapes are correct, but there are several screws that should not show.

the D ring, and front barrel screws could look better.

the doopy do's kit:

the clip is not curved, it's too short, and has no mag lock.

the front barrel nuts are a soft pull.

the kit does not come with a scope or a hengstler, so that's another minus.

if you order the scope, it's a really nice replica, good detail, and compares correctly with

the screen used type.

the hengstler you'd order from doopy do's is not the eagle logo, it's the 611 logo.

nice but wrong!

all in all the best looking blasters mentioned in this thread, being the blastmaster

e-11's just came from the APEX kit in colorado, and he used a resin pipe on one, and

a milled metal pipe on the other.

his T Tracks are from the home depot plastic rake.

they are really nice, but they have a slight taper on the height.

hard to see, but it's there.

sabrefreak on the RPF or GINO would be the best options for T Track.

if you wanted the best, go for the GINO, if you want 'darn good enough'

then go for the sabrefreak!

best course of action is to obtain a deact sterling and the proper scope.

getting a metal socket hengstler is very tough,

I would ask andy19422 on the FISD about that.

apex gun parts is my best suggestion:

you also have to keep in mind that the parts kit does not come with the

magazine, which can be purchased separately.

Link to comment
Share on other sites

Thanks for the detail, and correct E-11 info.

As i´m no E-11 pro at all.

The Apex looks nice for sure.

I will look into getting one more E-11 some day, not sure when...

for now i got my sci-fire ANH E-11.

Cheers bro, and thanks for your knowledge here about the gun :)

Link to comment
Share on other sites

everything I learned from andy19422 on the FISD, he, and sskunky have really shown the

way ahead of me... that's for sure.

all the blasters in this thread are nice enough indeed.

having a real sterling, or at least the parts from one, is the best way to go!

and I finally have the 32 rnd clip to cut down.

eventually the accuracy of my kits will include many details from

all these original parts.

but right now- all I'm doing is making up the Doopy Do's kit.

Link to comment
Share on other sites

  • 2 weeks later...
  • 8 months later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...