Jump to content

Duden15 Backpack Build (Pack 3)


Duden15
 Share

Recommended Posts

Time to start the Backpack. Since this is the only hurdle left before I can apply for PO.

Parts-List:

  • Karriom Frame
  • 2x Plunger Caps
  • 4 Seedtarys RWA
  • Brexton Box
  • Canteen
  • Tube that fits the dimension of the Mortartube
  • Tube for the left side of the Pack (DIY Hardwarestore)
  • 2 Wetwip bottels
  • Old Crashman Exaustport
  • Syphon Kit RWA
  • Radio Kit God of Libra
  • Mortatube control panel RWA

I have started to bend the Karimonframe to the right angel and I'm pretty happy how it turned out.

45713234471_ddb05c98aa_c.jpg 

30772989657_cbf8ccf6ff_b.jpg

Today I finished the exaustport.

40019444203_168322deca_b.jpg

 

The bottle seams a bit to long, might need to shorten it.

46932123152_1772cf7850_b.jpg

 

33108599018_12e55152b2_h.jpg

One question that I still found no answer is, if i need to remove the writing and the pattern of the canteen. I can't seam to find pics in which you can clearly see it.

40019447663_efce9cfacc_b.jpg

And a nother question regarding the shotgunshells, is the back (part that faces the motartube) closed? I know the wire is to long.

46932125092_dffcf2c74a_c.jpg

 

 

 

 

  • Like 2
Link to comment
Share on other sites

Difficult to say about the canteen, you are right, there aren't any pictures showing such level of detail. I would recommend sanding it down slightly. Guess they didn't really take the time to sand it down properly when preparing the props for filming. 

  • Like 1
Link to comment
Share on other sites

I won't worry so much about the canteen's numbering, no reference for that, just sand it down.

Don't forget to trim the length of the top part of the karrimor frame.

Also the 5 ribs seedtrays need to open up a little. 

Well done on the bend btw! 

  • Like 1
Link to comment
Share on other sites

Thanks for the answers, I guess I'll leave the canteen as it is for now, sice it is alredy painted. 

Thank you for metioning the hight m4verik. I have cut them to length, it is just an old picture. They were just mounted with some tape to better show the angel, as soon  as they'll get atached right I'll fix that.

The bend was suggested by Hausi.

Found a picture of the transistors, looks like they are closed...

Link to comment
Share on other sites

Thank you Hausi, today I tried to replicate the red things (don't know the name) on the backside of the pack. My karimon frame came with one of them in brown.

32087562227_6394849155_b.jpg

I just sew on some red fabric.

46305000004_7b1764f797_b.jpg

The other one I hade to sew completly.

46115356485_9f56851123_b.jpg

Thanks to m4vriks wip I found out about the bottles beeing 14,00-14,50 cm long.

 

Link to comment
Share on other sites

Thanks , finally it's getting somewere.

Today I cut the frame to lengh and tried out the placement of the parts together.

46281771595_f1d0551787_c.jpg

Not cut yet.

47144150332_9ac2b57aa0_b.jpg

Cut version.

40231271063_ac0f34184a_c.jpg

47144150742_1dd29724cd_c.jpg

The parts that I still nedd to attach, are the mortar tube, the transistors and the Canteen.

Do I need to put another shorter and smaller tube on the left side of the pack or is that optional?

There are some pictures with it and some without. I'm a bit confused. For example:

46472465844_d5e7ba5549_h.jpg

40231401143_df33d2ed26_h.jpg

 

  • Upvote 1
Link to comment
Share on other sites

Since the weather was so good today I painted the transistors today and also attached the mortar tube.

47199682141_61aa466d0a_c.jpg

46285288235_d91a810b40_c.jpg

I didn't like the vacformed tuperware lide that I have, so I ordered a vintage one. Hope it was the right model.

 

  • Upvote 1
Link to comment
Share on other sites

I would like to be further but today nothing went according to plan...:6:

The upper seadtray's are connected.

47212012071_9ce783775d_c.jpg

46297630535_278e2fa715_b.jpg

I tried to produce the paint error (I guess) on the brexton box, not finished yet. I need to get the edges a bit smother...

33336523488_b293ebd040_b.jpg

33336743168_76a57d8060_b.jpg

  • Like 1
Link to comment
Share on other sites

Thanks you, it's really annoing. But I'm almost finfihed now.

33344173548_93a363f951_c.jpg

33344175168_56bf512a68_c.jpg

40254753443_69f1ca1df6_b.jpg

40254754473_8d00c29df6_b.jpg

47219759151_7b1354dffe_b.jpg

33344171498_c857dfd1f3_b.jpg

I'm still missing the radardish, it is on its way. Might chance the big tape, it isn't wrinkeling enough. The rest is finished or am I missing something?

Edit: Add the lad pipe, if it is required.

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...