Andi85 Posted September 26, 2018 Author Share Posted September 26, 2018 Have now worked on the pack, but I'm not so sure if that's ok?I made the tape crosswise and wrapped the wire around it Quote Link to comment Share on other sites More sharing options...
jcalus Posted September 27, 2018 Share Posted September 27, 2018 Great to see you going for the filter pack. I know PO is not SWAT, but it’s always nice to see people going for accuracy.. that toilet syphon you have.. great stuff. But there are a few things that really stick out. Here is a screen pic. And as you can see, there is only very small gaps between the filter, bottle, and Tupperware, and the filter used is also quite different. there is also no tape on the Tupperware or wire on the radio. Just double check..is that radio vac formed ? There is some sharp details but the edges are really round.. just curious. As I said the syphon is great, but don’t forget to cut off the the nub on the dome.. The radar dish needs to have a black, not white disk on the back of it. And the seed trays.. They seem to be missing the needed ribs.. Wouldn’t hurt to slide the radio up so it’s hanging over the top of the bottom seed tray. Hope this didn’t come across as too critical. Your armour is looking great and I’m sure you want the same for your pack.Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
jcalus Posted September 27, 2018 Share Posted September 27, 2018 Hope these pics help.Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Andi85 Posted September 27, 2018 Author Share Posted September 27, 2018 Hi jcalus, super many thanks for the detailed info. I think so I can continue working. So I set the pack out and make the antenna black. The wire and the tape comes off again. should I also change the oil filter. in the picture this looks a little smaller and wider. Quote Link to comment Share on other sites More sharing options...
dutchy Posted September 27, 2018 Share Posted September 27, 2018 It seems that you are getting all the help you need to become a deployed Police Officer! You're close to deployment now! Looking forward to seeing it all come together. Good luck! Quote Link to comment Share on other sites More sharing options...
Andi85 Posted September 27, 2018 Author Share Posted September 27, 2018 Hi guys I have the things on the pack again realigned, the image is only for intuition is not ready. Tomorrow I drive a new oil filter look, and you still have a good tip which box I can take (the top right of the pack) looks better?Or gibr it for the oil filter an accurate Beseichung or measures he should have Thanks Dutchy, I am trying to get into your ranks 1 Quote Link to comment Share on other sites More sharing options...
jcalus Posted September 27, 2018 Share Posted September 27, 2018 No problem, we are all here to help our fellow troopers. The new realignment looks really good! As far as the oil filter goes, I’d suggest, yes, replace it. I know bigwam has a good looking 3D print on his pack and pandatrooper has a tutorial out there on how to make one. I made mine, and would be more than happy to help you out. In fact, I’m rebuilding my pack so I can share the details on how to make the filter in a few days. I’m still on vacation in Hawaii...lol.. Sent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted September 27, 2018 Author Share Posted September 27, 2018 I'm glad to hear that, and thank you again for the info. Wish you a nice rest holiday in Hawaii 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 1, 2018 Author Share Posted October 1, 2018 Hi guys,I have now changed the filter and worried me a new luch box. Unfortunately, I'm currently not from Brexton but I'm still looking for it. Quote Link to comment Share on other sites More sharing options...
Hausi Posted October 1, 2018 Share Posted October 1, 2018 Hey Andi, sorry for replying so late on the subject of your upgraded pack but the MEPD DOs were out there trooping (Speyer ) I appreciate it that you are going for accuracy, great work so far mate, your pack is getting better and better! As Jcalus has already said, we all here at the MEPD are aiming for accuracy and I really like it that you have realigned the parts on your pack but we are also keeping in mind that this is not SWAT yet, for SWAT you would also need to build a new radio with a leather/pleather surround and all the right sockets and the mounts for the carrying strap but.... for PO your pack is almost good to go, the only change I´m asking for has already been mentioned by Jcalus too: You will have to cut off the nub on the dome of the syphon where I have drawn the red line. That´s all mate. Quote Link to comment Share on other sites More sharing options...
Hausi Posted October 1, 2018 Share Posted October 1, 2018 Oh and I forgot, the lunch box you have is okay for PO but you were asking for the screen used item´s name: it´s a tupperware "stow n go" box: 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 1, 2018 Author Share Posted October 1, 2018 Hi Hausi, that's no problem. I got very good help. Super glad to hear me. I will cut off the nope and paint the new lunch box. then tomorrow I will show the new pictures 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 2, 2018 Author Share Posted October 2, 2018 Hi Hausi I have now painted the lunchbox and cut the nope.I have already ordered a new backpack so that I can start next the SWAT and can complete the Cantina Captain.greetings Andi Quote Link to comment Share on other sites More sharing options...
jcalus Posted October 2, 2018 Share Posted October 2, 2018 Nice new filter! Looks great. But What happened to the old Tupperware container you had? The shape was spot on, ..just needed to lose the nubs in its corners. Lol.. A nice touch would be to paint the silver screws you have holding the trays together. If someone would take a picture of you with a flash, they will really shine. Your doing awesome work! Sent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 2, 2018 Author Share Posted October 2, 2018 Thank you for the praise , the screws heads on all still work with the blue over Quote Link to comment Share on other sites More sharing options...
Hausi Posted October 3, 2018 Share Posted October 3, 2018 Hi Andreas, Are you ready for the second round mate? Application Review: Part 2 Name: Andreas Koch Legion ID: TD- 29185 Forum Name: Andi85 Garrison: German Garrison Helmet a. Green lenses: check b. Paint color of traps / tears: check c. Correct number of teeth: check d. Mic tips: check e. Vocoder color: check f. Tube stripes: check g. Rank bar on ears: check h. Brow: check i. Side screws (ears): check j. Weathering: check *additional comments* Nice work getting those tubestripes positioned correctly, I know they can be a pain in the …. RESULT ON HELMET Checked & Cleared Armor details a. elastic straps shoulders: check b. neck seal: check c. black undersuit: check d. shoulder bells: check e. biceps: check f. forearms: check g. pauldron: check h. chest / back plate: check i. kidney / butt plate: check j. ab plate / side rivets / cod: check k. strapping system: check l. thighs: check m. shins / calves: check n. sniper plate: check o. boots: check p. gloves: check q. hand plates / guards: check r. ammo belt (waist): check s. ammo belt (right knee): check t. canvas belt: check u. pouches: check v. weathering: check *additional comments* There was quite a lot to do but you have completed all tasks successfully! RESULT ON ARMOR Checked & Cleared Backpack a. details: check b. weathering: check *additional comments* Your pack is good to go and looks so much better now that you have changed the colour but I definitely agree with Jcalus that your previous choice of lunch box was far better as far as the shape is concerned. I would still suggest that you try to get a real Stow n Go box though. And definitely get those screw heads painted. RESULT ON BACKPACK Checked & Cleared Weapon a. details: check b. weathering: check *additional comments* A really nice looking blaster but I guess it´s pretty heavy…is it? RESULT ON WEAPON Checked & Cleared Andreas, this was your second review, I really appreciate your enthusiasm and your attitude to get things done... and it was worth it, I think your gear looks even better now than it already did before, congrats mate, well-deserved! Knowing that you are really into working on Bobas, especially painting them, I assume you are all about making your gear as screen accurate as possible and because of that I´m pretty sure to see those changes as suggested by my fellow dirty dudes and myself pretty soon. Has somebody said SWAT?? For the next step you will need some new weapons but adding a wooden buttstock to a DLT will help to save some weigth and make trooping so much more comfortable. For now I can just say: You have successfully followed the guidelines in regards to the MEPD CRL and have met the requirements, be proud of yourself. Please send the pic you want to use to Luis (Sandman Tigui) and we'll get you squared away. We will have your updated information uploaded into the MEPD system very soon. Congratulations on becoming a Deployed Officer of the MEPD! Now please report to the Mos Eisley Mess hall where you'll serve the troopers until the next newbie gets cleared. Cheers mate! Hausi - MEPD Deployment Officer 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 3, 2018 Author Share Posted October 3, 2018 jiaharrr just great . Thank you for all the support. You do not have that kind of stuff often. Hausi thank you for the nice words. Yes my next step is he SWAT, I have already ordered new thing these will arrive in early November and I will make any changes. So that my Cantania Capatain is as accurate as possible. Thank you all. I also learned a lot again. 1 Quote Link to comment Share on other sites More sharing options...
jcalus Posted October 3, 2018 Share Posted October 3, 2018 Congratulations and welcome to the PO ranks. You did a great job and hope there is a celebration in Europe so I can troop with you there.Sent from my SM-G930W8 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
MrFlavaFlave Posted October 4, 2018 Share Posted October 4, 2018 Congrats and welcome to the PO brother! 1 Quote Link to comment Share on other sites More sharing options...
DarthStevius Posted October 4, 2018 Share Posted October 4, 2018 Great news Andreas. Congratulations and welcome to the PO team 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 4, 2018 Author Share Posted October 4, 2018 Hi guys,many thanks for the nice words. I will now change a few things to the backpack.I'm very happy to be able to do it with you here, it fills up really well best regards Andreas Quote Link to comment Share on other sites More sharing options...
bigwam Posted October 4, 2018 Share Posted October 4, 2018 Congratulations Andy!! 1 Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 4, 2018 Author Share Posted October 4, 2018 Thanks Bigwam Best regards from Germany Quote Link to comment Share on other sites More sharing options...
Markus ' tiny ' Zeitvogel Posted October 5, 2018 Share Posted October 5, 2018 Well done Andy! Congratulation and welcome to the dusty planet. Quote Link to comment Share on other sites More sharing options...
Andi85 Posted October 5, 2018 Author Share Posted October 5, 2018 Thanks Markus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.