Duden15 Posted February 24, 2018 Share Posted February 24, 2018 Hi there, so while I'm waiting on some parts for my helmet I decided to start my T-21. I'm using pandatroopers template. Most parts are from german hardeware stores, some are bougt from 501st members or online stores. I've realised that the stock brush parts are to big so I orderd some at toschetarders. The details are made of 2mm abs. Added some putty to fill the gaps. Received the sling it's from amazon. Quote Link to comment Share on other sites More sharing options...
Hausi Posted February 24, 2018 Share Posted February 24, 2018 Nice work mate Guess you could sand that butt stock some more, still looks a little boxy. Using an angle grinder with a sanding bit has done the job for me. Quote Link to comment Share on other sites More sharing options...
henselmonster Posted February 24, 2018 Share Posted February 24, 2018 Looking great! heres some examples of the Lewis gun buttstock for reference Quote Link to comment Share on other sites More sharing options...
Duden15 Posted March 2, 2018 Author Share Posted March 2, 2018 Thanks for the pics, tried to get as close as possible with my belt sander. Here are some pics: Althoug I got some parts from shapeways. Quote Link to comment Share on other sites More sharing options...
mikelbrierly Posted April 2, 2018 Share Posted April 2, 2018 Looks awesome so far!! Quote Link to comment Share on other sites More sharing options...
Duden15 Posted April 6, 2018 Author Share Posted April 6, 2018 Thanks, I‘m waiting for some parts. If the arrive I will update this post. Quote Link to comment Share on other sites More sharing options...
dutchy Posted April 6, 2018 Share Posted April 6, 2018 Great!! I know about the amount of work that goes in these big boys...but i'm looking forward to see the result of the finished T21!! Quote Link to comment Share on other sites More sharing options...
Duden15 Posted May 10, 2018 Author Share Posted May 10, 2018 Thanks to @spOOL68 the T-21 kit finally arrived. He did send me a new one since the first is stuck in brazil. The emperor might know why. When I finished the weathering of the armor the T-21 will be the next stepp. 1 Quote Link to comment Share on other sites More sharing options...
spOOL68 Posted May 11, 2018 Share Posted May 11, 2018 On 5/10/2018 at 11:01 AM, Duden15 said: Thanks to @spOOL68 the T-21 kit finally arrived. He did send me a new one since the first is stuck in brazil. The emperor might know why. When I finished the weathering of the armor the T-21 will be the next stepp. That's the best pic I've seen in a long time Glad that one finally got there. Who knows maybe someday you'll get the one from Brazil too. lol!!! Quote Link to comment Share on other sites More sharing options...
Duden15 Posted June 24, 2018 Author Share Posted June 24, 2018 After approval and finishing my Bapty E-11 I'm back at the T-21. Just added some of the resin parts to the stock. The cleaning brush housing is installed and I glued some magnets to the sight to hold it in position. Quote Link to comment Share on other sites More sharing options...
Duden15 Posted August 2, 2018 Author Share Posted August 2, 2018 Finally some progress! Finished the stock and painted it. The barrel still needs a bit of work. 1 Quote Link to comment Share on other sites More sharing options...
Hausi Posted August 2, 2018 Share Posted August 2, 2018 Nice work mate! Have a look at some real Lewis Guns to get all the details right. It seems you are having some difficulties with your picturehost, as they look quite grainy, try flickr, for me it has worked fine... so far. Quote Link to comment Share on other sites More sharing options...
Duden15 Posted August 3, 2018 Author Share Posted August 3, 2018 Thanks, well seems picload had an usless update... Here we go again I'm missing the circels on the stock and I messed up the transition of the wooden stock an the black part (missing the word). Might sand the paint away and finish it like the rest of the stock. Decided to use fuelhose on the barrel. I'm a bit coufused, does the greeblie I'm holding belong there or not? I know one goes on top of the barrel but I'm not sure with the bottom one. There are so many different version here and it's hard to tell from the screencaps. 1 Quote Link to comment Share on other sites More sharing options...
Hausi Posted August 3, 2018 Share Posted August 3, 2018 The greeblie you are holding in the last pic belongs on top of the barrel, the other one not seen in your pics belongs at the bottom. Furthermore you should reposition the gas plug as it is found further to the front of the real Lewis gun. This will also give you more room to attach the lower greeblie. I'm sure it won't be very difficult for you to adjust the back part where the receiver housing meets the buttstock. Keep up the good work Paul 1 Quote Link to comment Share on other sites More sharing options...
BountyHunter Posted August 3, 2018 Share Posted August 3, 2018 Hi look at my gallery: https://photos.google.com/share/AF1QipN4ql78Uhlj53hcThV2VWx7it8B1LynxWnW--RWonQLb-2y52405D3puEJXdiEdDQ?key=N3QyZVpPYy1OUjl0azhEWVB6UGxOeWhmbGtUdk9R Here you will find the right location for details. BH Quote Link to comment Share on other sites More sharing options...
Duden15 Posted August 3, 2018 Author Share Posted August 3, 2018 Thanks for the answers. Your T-21 in on a different level of detail BountyHunter, I'm not able to reach that. Here is the barrel, still missing the blue wire Still not sure what to do with the transition at the receiver housing and the buttstock. Just sanded and painted like the rest of the buttstock. Quote Link to comment Share on other sites More sharing options...
Duden15 Posted August 4, 2018 Author Share Posted August 4, 2018 Finished the parts today, need to get it dirty. I'm quite happy how the endresult turned out, although there is always room for improvment. I'm exited for the first troop with it, it is so heavy. Many thanks to Roger, Urs and all other troopers helping me. 1 1 Quote Link to comment Share on other sites More sharing options...
Hausi Posted August 5, 2018 Share Posted August 5, 2018 Honestly, don't worry too much about that transition mate, your blaster looks awesome! 1 Quote Link to comment Share on other sites More sharing options...
spOOL68 Posted August 6, 2018 Share Posted August 6, 2018 Nice Job! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.