Jump to content

*DONE* TD-33667 Requesting Deployment


Recommended Posts

Name-Michael Black

TDID-33667

Username-Ravens6

Garrison-T.A.G.

3f33909d20b5b3f77a5256a6c872b172.jpgd10b1057124a7f8ed7b7e358de7666a7.jpg0cd1926d32d02cc69a64a855cdf5de39.jpgd67c615c72c89215650ebc4bfc2de72e.jpg6a67327af6541d7bcbeb1e335642dd39.jpgcb76ead1debc142c7253ccd46f4f42eb.jpg0bdc0e95c8b80e838594b26715a8b150.jpg06fe27fe71ae2c02fddf0f98063912a3.jpgfd509efdec08ea5014129e2e62d328de.jpg

 

 

Sent from my iPhone using Tapatalk


eaf0bd42f2505996e55b903b81e7ca56.jpga09d1b43c45054136f51d33faed65ef4.jpgb4e669a3ba1a7b3e15186461af77c801.jpgbf35d26099352b348ef96747bd1df941.jpg368259657097982e6f05b3394f40f1d7.jpg12ef0c38b2822a1c89ee6f3047a3e7e9.jpg321502b0d320978041eb7915c4fa67d4.jpg
Thank you



Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

You have to swap your chest to back straps to white elastic. It looks like you have nylon. Your canteen/bee stinger needs to flip around. The indentation part should not be facing out. You need to trim the cap portion off the canteen and insert a wooden dowel or anything to keep the stinger portion straight. You can look at strider's pack builds and even mine to see what I mean about the cap. 

  • Upvote 1
Link to comment
Share on other sites

You have to swap your chest to back straps to white elastic. It looks like you have nylon. Your canteen/bee stinger needs to flip around. The indentation part should not be facing out. You need to trim the cap portion off the canteen and insert a wooden dowel or anything to keep the stinger portion straight. You can look at strider's pack builds and even mine to see what I mean about the cap. 


Thanks for the update..
I'll get onto it ASAP.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Jason's comments are spot on.  Besides those few minor fixes, everything looks great.  Good luck!


Thanks Jason,
I'm on to the fixes ASAP


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

You have to swap your chest to back straps to white elastic. It looks like you have nylon. Your canteen/bee stinger needs to flip around. The indentation part should not be facing out. You need to trim the cap portion off the canteen and insert a wooden dowel or anything to keep the stinger portion straight. You can look at strider's pack builds and even mine to see what I mean about the cap. 


Hi Jason....
Updated modification as requested..
26fac9fdd07afe376461336dd9d53d4f.jpg
Bee stinger straighten with hollow bamboo.

d7500338d555e823b582964d6865aa6a.jpg
Elastic strapping with sewn caps over clips.
76abfd9e13151001b3d1befe7296c08c.jpg
4da141c050772ce65e5e87d009c7fe6c.jpg
f36da8127d7e453d25f55c69b70c747d.jpg
Battleship Grey on water bottles.
6036f592d56c70f649bf5b538811f465.jpg
Bottom container turned around and showing No sent.
Thank you for your time...



Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

I am no expert so take my feedback with a grain of salt :-) first thing I noticed was it look like you had a malfunction on your right side strap between the ab plates and kidney plate where the strap came loose and caused a large gap try to get those gaps closed all the way. The second thing I saw was that a picture you just posted of an update of the elastic straps on the shoulders I think what they meant was is you needed the sewing detail on the shoulder that looks more like 149d565f31e339c90dd7c7ff9baf27e9.jpg
The other piece I would take another picture of would be the hand plates they're supposed to be latex so I would give them a squeeze to show they are. The ones there look really shiny and almost like their ABS and rigid. Like this4d3452b7f3195f3ac911dbbf763ddd84.jpg

Sent from my iPhone using Tapatalk

  • Upvote 1
Link to comment
Share on other sites

I am no expert so take my feedback with a grain of salt :-) first thing I noticed was it look like you had a malfunction on your right side strap between the ab plates and kidney plate where the strap came loose and caused a large gap try to get those gaps closed all the way. The second thing I saw was that a picture you just posted of an update of the elastic straps on the shoulders I think what they meant was is you needed the sewing detail on the shoulder that looks more like 149d565f31e339c90dd7c7ff9baf27e9.jpg
The other piece I would take another picture of would be the hand plates they're supposed to be latex so I would give them a squeeze to show they are. The ones there look really shiny and almost like their ABS and rigid. Like this4d3452b7f3195f3ac911dbbf763ddd84.jpg

Sent from my iPhone using Tapatalk


Thanks Hans,
Fixed up abb and Kidney plate strapping.21d71a3b97f6399ffde16ca5dcd9ce9b.jpg

I've noticed the cover stitching on the chest and back strap,will fix up today..never noticed.
And for latex covers I'll just have to order a set in because all I have is the hard plastic.
Thank you Hans



Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


Thanks Hans,
Fixed up abb and Kidney plate strapping.21d71a3b97f6399ffde16ca5dcd9ce9b.jpg

I've noticed the cover stitching on the chest and back strap,will fix up today..never noticed.
And for latex covers I'll just have to order a set in because all I have is the hard plastic.
Thank you Hans



Sent from my iPhone using Tapatalk

2d0867e7649c6694ead079fc81802e46.jpg
Updating Straping for chest and back plate



Sent from my iPhone using Tapatalk
  • Upvote 1
Link to comment
Share on other sites

Good job already, looking forward to see you joining the PO ranks soon!

:salute:


Thanks you Dutchy.



Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Other thing I noticed is your right side between the kidney and ab plate. You're going to need to close that gap. Try using some nylon webbing and snaps. If the gap is still greater than 1/2", you will need to shim. 

  • Upvote 2
Link to comment
Share on other sites

Other thing I noticed is your right side between the kidney and ab plate. You're going to need to close that gap. Try using some nylon webbing and snaps. If the gap is still greater than 1/2", you will need to shim. 


1875a2abef5682a2eedc592a367a170f.jpg77a44dff84ca64840e32abef5ad0832d.jpgb977f7d5840f40013abce754537d8afd.jpg
Hi Airborne
Update on Kidney and Abb plate,right hand side.
Kidney plates with 1'' shimmy both sides.
With a gap no more then 1/2'' on right or 12 mm.
Thank you for pointing out.



Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


1875a2abef5682a2eedc592a367a170f.jpg77a44dff84ca64840e32abef5ad0832d.jpgb977f7d5840f40013abce754537d8afd.jpg
Hi Airborne
Update on Kidney and Abb plate,right hand side.
Kidney plates with 1'' shimmy both sides.
With a gap no more then 1/2'' on right or 12 mm.
Thank you for pointing out.
PS-that's breathing out..
Full stretch out..



Sent from my iPhone using Tapatalk




Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


1875a2abef5682a2eedc592a367a170f.jpg77a44dff84ca64840e32abef5ad0832d.jpgb977f7d5840f40013abce754537d8afd.jpg
Hi Airborne
Update on Kidney and Abb plate,right hand side.
Kidney plates with 1'' shimmy both sides.
With a gap no more then 1/2'' on right or 12 mm.
Thank you for pointing out.



Sent from my iPhone using Tapatalk

Maybe just me but the right gap looks more than 1/2 inch , I used Velcro to pull the gap closed and secure .


Sent from my iPhone using Tapatalk
  • Upvote 1
Link to comment
Share on other sites


Maybe just me but the right gap looks more than 1/2 inch , I used Velcro to pull the gap closed and secure .


Sent from my iPhone using Tapatalk

I'll do a photo shot tomorrow...
It's 2010 here.
Go back to the drawing board and submit later in a couple of weeks.
Get it right...thanks.


Sent from my iPhone using Tapatalk
  • Upvote 1
Link to comment
Share on other sites


I'll do a photo shot tomorrow...
It's 2010 here.
Go back to the drawing board and submit later in a couple of weeks.
Get it right...thanks.


Sent from my iPhone using Tapatalk

It's close just snug it up


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Don't give up! I have to shim my WTF ab to kidney A LOT. Definitely built for runway model skinny dudes. I would recommend you putting another coat of ABS paste and multiple levels of sanding paper grit followed by a wet sand. You're almost there!

  • Upvote 1
Link to comment
Share on other sites

Don't give up! I have to shim my WTF ab to kidney A LOT. Definitely built for runway model skinny dudes. I would recommend you putting another coat of ABS paste and multiple levels of sanding paper grit followed by a wet sand. You're almost there!


Haha! Me too ! To many imperial cookies for me! e7a548b907a6179852e6de0997b1d99d.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...