Jump to content
henselmonster

3D Files for Field Pack - 3D Printing

Recommended Posts

If you have been following my previous posts you'll see I have been working on 3D printable files for a lot of the backpack parts.

I want these to be available to everyone, and allow people to update the files as they need.  They are all a work in progress. The more I learn, the more accurate I can make them. My ultimate goal is to be able to provide free 3d printable files for all field pack styles. It will be a long process but i think this is a good start. I will be sure to make note of when things are updated. If you made any modifications, or make your own parts, please post them here and I will add them to the list!

Here are a few links to the ones created so far!

Stormtrooperguy's Sonix Radio - https://www.thingiverse.com/thing:1862286

Henselmonster's Shires style siphon - http://www.thingiverse.com/thing:2172916

Stormtrooperguy's Siphon - https://www.thingiverse.com/thing:1949934

Henselmonster's Exhaust -  http://www.thingiverse.com/thing:2172649

Crookknight's Exhaust - https://drive.google.com/open?id=0B-5MSAWBsr_vQWN6bExKU2RLZlU

Henselmonster's Canteen - http://www.thingiverse.com/thing:2172323

Crookknight's Canteen - https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8

Stormtrooperguy's Canteen - https://www.thingiverse.com/thing:1949924

Henselmonster's Mushroom Caps - http://www.thingiverse.com/thing:2282341

Stormtrooperguy's Mushroom Caps and Bottles - https://www.thingiverse.com/thing:1949940

Stormtrooperguy's Radar Dish Mount - https://www.thingiverse.com/thing:1952134

Stormtrooperguy's Mortar Tube End Caps - https://www.thingiverse.com/thing:1949943

 

 

 

 

  • Upvote 5

Share this post


Link to post
Share on other sites
If you have been following my previous posts you'll see I have been working on 3D printable files for a lot of the backpack parts.

I want these to be available to everyone, and allow people to update the files as they need.  They are all a work in progress. The more I learn, the more accurate I can make them. My ultimate goal is to be able to provide free 3d printable files for all field pack styles. It will be a long process but i think this is a good start. I will be sure to make note of when things are updated. If you made any modifications, or make your own parts, please post them here and I will add them to the list!

Here are a few links to the ones I have created. 

Shires style siphon - http://www.thingiverse.com/thing:2172916

Exhaust -  http://www.thingiverse.com/thing:2172649

Canteen - http://www.thingiverse.com/thing:2172323


These are great

Sent from my SM-G930P using Tapatalk

  • Upvote 2

Share this post


Link to post
Share on other sites

Giving back to the community! I LIKE it... see what I did there? In all seriousness though, thank you John! 

  • Upvote 2

Share this post


Link to post
Share on other sites

I printed the Canteen  (3D file by Henslemonster) last night.  I used one of my Hatchbox Alpha machines set to high quality PLA.  Turned out pretty good.  Going to paint it and post it on here to get everyone's thoughts.  I love the idea that I will not have to go through the painstaking process of making the canteens again.

As soon as my filament arrives, I will print the other 2 parts on post pictures on here of the final products.

 

Henslemonster did a good job on the files, can't wait to see the others.

 

18033127_10211930973416942_3366254631545

 

17990893_10211930973376941_5890822801005

 

18010240_10211930972856928_8784011667956

  • Upvote 1

Share this post


Link to post
Share on other sites

Hopefully you will offer these for sale here :) 

 

My 3  year old is hooked on those dang Grocery Gang and bling bags too!

  • Upvote 1

Share this post


Link to post
Share on other sites
3 minutes ago, Airborne Trooper said:

Hopefully you will offer these for sale here :) 

 

My 3  year old is hooked on those dang Grocery Gang and bling bags too!

Don't worry! Working on a sales thread for all my backpack parts, as well as the electrobinoculars!

Share this post


Link to post
Share on other sites
Hopefully you will offer these for sale here [emoji4] 

 

My 3  year old is hooked on those dang Grocery Gang and bling bags too!


My 7 year old also is hooked on the Grocery Gang.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

This is an updated 3D rendering.  Going to try a test print tomorrow night once new filament arrives.

Made it more rounded.

18010902_10211940979347084_7807538253727

  • Upvote 1

Share this post


Link to post
Share on other sites
1 hour ago, CrookKnight said:

This is an updated 3D rendering.  Going to try a test print tomorrow night once new filament arrives.

Made it more rounded.

18010902_10211940979347084_7807538253727

Nice looks great! Feel free to add a link here if you would like to share it and i can add it to the list

  • Upvote 1

Share this post


Link to post
Share on other sites

I will upload the design files shortly.  Just need to set it up so they can be shared.  Here are some pictures of the finished product.

18057056_10211999749336297_1227553796623

 

18058064_10211999749376298_8094836150363

18118570_10211999749296296_2662228730131

17990749_10211999750016314_8874744981046

  • Upvote 2

Share this post


Link to post
Share on other sites

That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. 

Share this post


Link to post
Share on other sites
That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. 



Sure. No problem.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

Below is a link to a version I have been working on and I use on the packs I sell.  I like the way John's is coming along also.  Looks a little more rounded.  I cannot upload files to Thingiverse, so I have them in Googledrive.  I have 3 large printers and can print these for people if they want them.

Here is the link.  https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8

Here is a 3D rendering.

18199282_10212030201577584_8695110285610

 

This is a picture of it on a pack that was just sent to Michael in Australia.

18198567_10212030236698462_1291453046187

This picture shows the version with the cap.  The cap has since been removed and a whole the correct size for the bee stinger has been added.

 

  • Upvote 1

Share this post


Link to post
Share on other sites
On 4/26/2017 at 11:47 AM, Airborne Trooper said:

That looks great. Last thing I would recommend is ditching the cap and making the mouth of the cantine solid. That's where the hole is drilled and the tube or bee stinger is inserted. 

Done.  I will post a picture of the reprinted portion when I build my next pack.  I have 3 pack orders in the pipeline.  I did post the 3D model, though.

  • Upvote 1

Share this post


Link to post
Share on other sites
1 hour ago, CrookKnight said:

Below is a link to a version I have been working on and I use on the packs I sell.  I like the way John's is coming along also.  Looks a little more rounded.  I cannot upload files to Thingiverse, so I have them in Googledrive.  I have 3 large printers and can print these for people if they want them.

Here is the link.  https://drive.google.com/open?id=0B-5MSAWBsr_vbDJTSTIzaTFZcW8

Here is a 3D rendering.

18199282_10212030201577584_8695110285610

 

This is a picture of it on a pack that was just sent to Michael in Australia.

18198567_10212030236698462_1291453046187

This picture shows the version with the cap.  The cap has since been removed and a whole the correct size for the bee stinger has been added.

 

Awesome dude! Thanks for sharing, I'll add it to the list!

Share this post


Link to post
Share on other sites

Has anyone tried printing the Shire's Style Siphon yet?  I was thinking about giving it a shot and was wondering if it came out ok.

Share this post


Link to post
Share on other sites
On 5/19/2017 at 2:40 PM, CrookKnight said:

Has anyone tried printing the Shire's Style Siphon yet?  I was thinking about giving it a shot and was wondering if it came out ok.

If you make one, let me know! I am looking for one and if I can get one stateside, that'd be great. 

Share this post


Link to post
Share on other sites
If you make one, let me know! I am looking for one and if I can get one stateside, that'd be great. 


I will print one soon.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×