Duden15

As expected the pauldron (Trooper1) arrived today. Looks great, I'll make a test fit of all parts in the evening. So now only the ears are missing.

My neck seal from Darman arrived today, so hopfully my pauldron shoud arrive the next days. Still waiting for the ears . The neck seal fits perfectly and is very comfortable.

Congratulations

Thanks again for the answer Hausi. Not much progress over the Weekend. Almost finished the Helmet, still missing the ears from RS. I although changed the strapping of the forearms, it's is now seperatable from the biceps.

@Hausi Thanks @GilFran007Thanks for mentioning, I already know about that. I don't think thats an issue, it's just to hold the belt in place and can't bee seen if the belt is attached. The belt came with attached snaps and I did't changed the location. The hole you can see on the belt, was one of the snaps I palced. It was in the wrong spot so I hade to change it. Please correct me if I'm wrong but as I see it, it is like the strapping on the armor the outside must be screen accurate but the inside doesn't matter. If thats an issue, than I can eassily fix it with abs sludge.

Just a little update, started painting the helmet. Still missing some parts from RS, they should be on the way. Painted the screws. Raised the abdominal part. Befor: Now: The pauldron and the necksael were both shipped yesterday, can't wait for them to arrive. This wasn't planed, but I found the parts in the hardware store. So I though why not. I just need to finish the helmet and the weathering, than I should be good to go for basic approval.

Looks awesome.

Looking good

Thanks for the answer and the sugestion. Hade to change a bit more, the guys from thr GG found even a bit more. Much better now (pic below). Made the biceps smaler (diameter) I forgot were I put the undersuit pants so its in normal pants . Didn't found it that qiuck, now I know were it is. Raised the sniperplate and reduced the diameter of the thighs.

Thanks, I'm alomost done with the armor. Here is the first testfit, what do you think? Helmet is'nt finished, still waiting for the parts from RS. I woul'd say the forearm armor needs to got up a bit. The uppder arm armor parts can't go down any more, so the gap betwenn the gloves and the forearm armor will become bigger.

Made a bit of progress over the last days. All parts are glued with coverstripes. The hooks on the shins are installed: Hade to glue some foam in the upper arm to sit tighter: I ordered my neckseal from Darman and bought some functional underwear at a local motorcycle shop. Final to-do liste: Strapping the thigh Strapping the arms Finish off helmet Decide on pauldron colour and order it

Looks really nice! Excited to see the rest of your build

Ah, I was just thinking about the hight. Thanks Was that some kind of force mind controll?

Thanks fore the quick answer. So it looks like this at the moment is this alright? It's only held in place with tape on the inside, just ignore the clamp and the magnets.

Thanks for the positive feedback, got some work done on the weekend. Belt finished (the lighting is a bit ******) Backside: Attached to torso: The thigh are finished except the ammostrap. The lower legs are glued on the front, working on the hooks on the back side and the diamond knee plate. Than I have a question, are there dimensions for the the placement of the ammostrap. Like how much room there is till the end of the leg? Or is it just sense of proportion?

Looks great, can't wait to see it finished.

Hade some spare time today so finished the strapping for the body.

Thanks, I‘m waiting for some parts. If the arrive I will update this post.

Looks great so far. I wish you luck with the ears.

Thanks, I started with the body. This is where I'm now. I only have one problem, I'm to thin for the kidney and abdome armor parts. I strappted them in place with tape and there are atleast 2cm air around my whoule body. Is this a problem? Or can I just ad some kind of foam to make it fit tighter? I already cut away some acces but I'm afraid that I cut away to much.

Not much happend the last weeks. I spray painted the helmet to simulate the hdpe colour Then I dedice to buy a already started TM armor Kit from a GG member. So the helmet and the strapping is RS and the rest ot the armor will be TM. Only the upper arms were completely assembled. Here is the box photo . The little white box is an anker. At the same day my DoopyDoo order arrived. Here is the armor spreaded out on my workbench. Just to make sure it fits. So now the big question how do I start? I read nearly 100 building WIPs the last week, but everyone is starting different. Is there somthing like the perfect order or do I just start where ever I want?

Thanks for the pics, tried to get as close as possible with my belt sander. Here are some pics: Althoug I got some parts from shapeways.

Thanks, I might come back to that offer. Danke, Ich hab das Backpack schon vor einem Jahr gebaut, muss vermutlich nur ein Paar Dinge anpasen.

Hi there, so while I'm waiting on some parts for my helmet I decided to start my T-21. I'm using pandatroopers template. Most parts are from german hardeware stores, some are bougt from 501st members or online stores. I've realised that the stock brush parts are to big so I orderd some at toschetarders. The details are made of 2mm abs. Added some putty to fill the gaps. Received the sling it's from amazon.

Oh, well the screws are already in place at the pictures. Anyway the new ears are ordered. In the waiting time I will work on my T-21. Might start the thread tomorrow.