Serious_bass

Pm sent

ok finished for the day... here are some progress pics... still a long way to go... but starting to take shape at least... none of the bits are actually joined as of yet... so a bit of tidying to do and then some fixing and gluing to get them all one structure... just a quick question... any of you guys who troop with these bigger weapons... do you have them so they break down? starting to get concerned about how im going to transport these... wouldnt fancy slinging them in the back seat and then getting pulled over by the police....

necessity is the mother of invention or something.... biggest drill bit i had was 12mm so my vents are now 12 mm... lol... looks ok...

got a bit of thime this weekend to fiddle about with this and am drilling the barrel shroud vent holes... anyone know what diameter the holes should be... i have drilled them 10mm but think they may need to be 15mm? Thanks Stu

Fantastic mate, I'm working on the same build and had the same problem with the template scale and the pipe dimension... I havntvhad much time to work on it recently... Have got as far as cutting the stock, trigger section and receiver... Still gave to get them sanded an tidied up and ur post has inspired me to get stuck in this weekend... I think ur stock and receiver look fantastic. Can I ask where u got the abs for the handle? Good luck with it...

Fantastic mate... This is on my 'to do list' after my mg34 and 2 e11 hasbro conversions lol! Look forward to your progress and the guide... Best of luck!

This is a fantastic offer and greatly appreciated. The more photos you can get the better... Side top and bottom pics of the receiver and also the stock would be of great help to me... But anything would be helpful! Thanks for this!!!

As for the scale, I was printing the templates out in work ( which doesn't have any specialised image software) when I followed the instructions on BBC, I think the printing was enlarging the images to almost 'fit to page'. The way I got around it was opening the picture in picture viewer, but then I think I right clicked or selected 'edit' , this opened up a paint type program and when I printed from that program, it printed to the correct scale ( I hope). As for pipe diameter, in the uk we use mm not inches and I couldn't find equivalent piping even after using an inch to mm convertor. So I am using 32mm abs waste pipe for the outer barrel and I think from memory 25 mm electrical conduit pipe for the inner barrel... Only problem is the 32 mm is going to be a tight fit and a slip of the drill could result in the receiver splitting...

thought i would keep u guys updated here as well (posted topic first on Emerald Garrison site) ok , got a bit of time this weekend, was able to salvage the stock pieces and trigger piece, but the receiver bits i had to bin and start from scratch again... here is how far out i was with the original templates... have temporarily screwed the bits together and glued them.. i have added another stock piece to widen it out a bit as i think im going to have an issue with the barrell and connector diameters.... could run the risk of actually splitting the wood trying to fit them... and i dont think a smaller diameter pipe will work for the barrel.. im sure i will find a way around it... So going to now spend a bit of time getting the receiver and stock sanded down and tidied up (a lot - kind of rushed recutting them), get a good fit for the trigger and get it sanded down and fitted... then onto the barrel will post again when further progress made... Cheers Stu

have managed to reprint the templates again, this time in exactly the right scale... not sure if i can salvage any of the 'main gun' parts , but i can certainly salvage both the trigger section and the stock... will post more pics when further progress has been made... Thanks for everyones help... cheers Stu

Hi from Belfast, northern Ireland I have been trawling through the forums for a few weeks now trying to soak up as much knowledge as possible before embarking on an mg34 scratchbuild. Got all the bits finally together yesterday and decided to get stuck in... However I have immediately hit upon a problem! I am using the tutorial on the blaster builders club... http://www.imperial-fleet.com/BBC/communit...php?f=4&t=5 the problem is I think the templates I printed were a little oversized... As the handle and trigger pull seem too big as the finger hole will be too far from the actual handle. As a result the whole assembly is to the wrong scale... I have obviously done something wrong whilst printing the templates... If I could get them printed at the correct scale I could probably salvage some of the pieces I have cut already... So would anyone know where I may have gone wrong? Alternatively would anyone have rough dimensions for the gun so I could try and create my own templates or trim the pieces I have... Thanks in advance stu