Jump to content

maj_hassel

Member
  • Posts

    96
  • Joined

  • Last visited

About maj_hassel

Profile Information

  • Interests
    Film, Computers, Music, Tiki collecting, and occasionally indulging my non-sexual fetish for vaccuformed plastic.
  • Location
    Chicago, IL

maj_hassel's Achievements

(1/14)

0

Reputation

  1. Although I've been on these forums for quite some time, I changed my call sign and think my old posts have been deleted. So, I thought it might be good to re-introduce myself. My name's Geoff and I go under the nickname "Maj. Hassel" (formerly Maj. Hangover). I have a complete (weathered, modded, etc) AP sandtrooper kit. On troops I carry my Hyperfirms Lewis gun, which usually doubles as a cane by the end of my troops. I'm not yet deployed because my pack, although complete, isn't fully assembled because of storage purposes (I live in a fairly small apartment with my g/f and there's only so much room for my SW stuff. Here's my armor/gun: Here's my pack, so far: (the mortar tube, dish and side bar are in another corner - the pack won't sit on the shelf when they're attached) In addition to a TD, I also have other completed armor: AP TK kit; a TE TIE pilot; a snowtrooper; Imp. Officer. Under construction are: Biker kit (for my g/f -- only really need to make the boots); a tusken raider; and ROTJ Boba. Hopefully, I'll get motivated and finish up my gear. Cheers!
  2. I'm looking for the vacuformed dome with the dimple on top which is supposed to sit on top of the hamburger stackers and connect to the intake manifold. Anyone know where to get one of these? I know someone--TK1536--was making them at one time. Have all of the runs ended or are there a few still floating out there? Thanks in advance for any leads.
  3. My first troop as a TD -- Wizard World Chicago -- WOOT!!
  4. Thanks for the feedback!! Here's one more pic I made and then I'm done.
  5. I picked up a can of white rain and tried to use it over the parts I had already sprayed. It did lower the gloss a little, but not enough for my tastes. I'm going to clean and re-weather a thigh piece and just use the White Rain to fix the paint. If it looks really good I'll re-do the whole kit. I took a damp paper towel and, with a little pressure, wiped off an area of one of my thighs. That's the great thing about hairspray and tempera paint, it comes off nice and clean--yet stays on when you need it to. I did take a bunch of pictures and did a little Photoshop on one of them...
  6. The paint is secured with hairspray, and I'm storing the kit in a canvas laundry bag, so the high parts (belt boxes, shoulders,etc.) will eventually rub off. The problem with the hairspray method is that is tends to give a gloss finish to the weathering. This kit will probably go through several different weatherings before I find one I really like and seal it on there. But I actually enjoy weathering so I'd hate to miss out on all of that fun. I suppose I could have put a little more time into the weathering but I, mistakenly, thought there was an event today that I wanted to troop as a TD but that's not until the 9th; this was kind of a rushed job. As for the backpack, I need a intake manifold. I also need to get the little tubes that go on the side of the upper box but am unsure what size pvc pip to use, but that's a question for a different post.
  7. I've had an AP kit I was going to use to make a TD for over a year and a half and I only recently have started putting it together. I had already cut the pieces out and weathered some of them. Later on, I taped some pieces together, tried it on, got discouraged, grumbled and moped about how it was way too small for me and shelved the project. I recently picked up a clean, pre-assembled, AP kit and, after some adjustments, it fit really well (I have lost 15 pounds since I first got the kit). Inspired, I decided to start work in earnest again on my TD. I've been working on it for the last week or two when I could, and today I had my final test-fitting! Here are some pics: You can see that it's been a while since I've worked with this kit; the weathering has rubbed off the chest piece and the edges of the helmet from being handled; most pieces haven't even been weathered yet. Unfortunately, there were a couple of screw-ups: I glued the knee-plate a little low and need to pry it loose and re-position it. I also, when I was originally cutting out the parts, over-trimmed the bottom lip of the chest plate. Oh well, not much I can do about it now--anyone have a spare sitting around? I should have this kit finished--minus some helmet wiring--within the next couple of days. Then I'll be able to add TD to my list of designations! --------------------------------------------------------------------------------- I finished weathering the kit. I wasn't really going for a "straight from Tatooine" look or, "...this is the exact weathering pattern of the third sandtrooper on the left in scene four" look either. I just wanted it to look like it's been out in the field for a long time on some really crappy assignments. I even left a little carbon scoring in from it's previous paint job. Here's how it came out: I haven't sealed the paint job yet (I use hairspray), and the belts still wet so I'm not trying it on until tomorrow. I'm going to use the standard pouches for my 501st submission, but for trooping purposes I'm going to use a pouch I customized which is great because it can hold quite a bit--all you need for those long troops
  8. As long as you cut the armor along the lines it will fit. I have the same dimensions--give or take five pounds--and my AP kit fits pretty good. Remember, we're a few inches taller than the stormtroopers in the movie so a little latitude is needed when scrutinizing how "screen-accurate" you look. Unlike the FX kits, the real suits' back plates didn't overlap the kidney plates; my seam could be a little tighter, but I'll live. You could probably lower your back plate a little bit. mine sits a little lower and still hugs the countour of my back. Here are some test-fitting pics I took this morning: You might want to raise the butt-plate a little bit. I know, mine looks a little but like I'm getting an "armor-wedgie" but I wanted decent seams across the back. If you want to see how I put my kit together LMK and I'll post pics. I hope I helped a little, Good luck!!
  9. I sure could've used this info when I was trimming off the excess ABS when I first got my kit. No worries really, one side's under a pauldron and the other side is behind a ammo pouch. But still.... [This is a disturbing example of the mindset of someone who needs to attend a Canon Obsessives Anonymous meeting.]
  10. I ran a search but didn't come up with anything, but it looks like, according to a photo in The Making of Star Wars book that at least some of the sandtroopers had shoulder straps. It doesn't look like the straps were the molded type the TK's had; they look like flat plastic. I'm not going to post a close-up since I'm guessing all of you own the book, but you should look at the guy with the hat, standing next to the dewback. His straps look like they connect to the back plate. So, am I way off in guessing that there might be someone selling a run of flat shoulder straps? P.S. I'm sure this topic's been covered; I usually am pretty late on the scene with most things. BTW, I just heard of this sci-fi show called Star Trek--it looks pretty cool!!
  11. Well, you can add me to the list. LMK when the you generate enough interest to warrant a bulk order. If that time never comes I'm willing to pay for an individual order. Thanks again!
  12. You should probably just start an new topic with the interest thread like you had planned. That way it will get more attention, as opposed to being buried at the end of this thread. I can wait, I'll definitely take one either way, but I'm sure it would be easier for you to do a bulk ordering/mailing as opposed to on a per-person basis. Thank you, BTW, for taking the time and trouble to make these available to us in the US.
  13. I'd buy one. Any way to get ne if the interest thread is unsuccessful?
  14. As it happens, the fates were with me and the bucket matches the armor really well. It's not an exact match, but not different enough so that anyone would notice unless you asked them to. Many thanks 4510!!
  15. Thanks for all of the advice! I had no idea that the bucket's not really supposed to match the armor. That certainly takes some of the weight off. I'm thinking (hoping, actually) that the difference in shades won't be too far apart and I can just leave it. The only reason I'm apprehensive to paint anything (I've painted several buckets and armor, just not with Rustoleum) is that the weather in Chicago's a bit inconsistent lately and it's pretty humid. With Rustoleum, how easy is it to clean off scuff marks? I'm sorry that you had to let your armor go; I hope the money helps with . I can't wait to try it on.
×
×
  • Create New...